Victron Energy Cyrix-i 12/24V-400A intelligent combiner for starter and service batteries
Code: OST_320210Product detailed description
Joint charging of two batteries
The Victron Energy Cyrix-i intelligent battery combiner controls the charging and disconnection of a starter and a service battery. When the voltage on one of them reaches 13.0 V (26 V) for 10 minutes or 13.8 V (27.6 V) for 4 seconds, it connects the batteries and they are charged together to full. If the voltage falls below 12.8 V (25.6 V) for 10 minutes or below 12.0 V (24.0 V) for 20 seconds, the batteries are separated again. It works in both directions.
These values apply to the factory setting (mode 0); in total, 4 modes with different connect and disconnect voltages are available. The batteries may differ in capacity, type and construction, but it is assumed that each one supplies its own loads.
Frequently asked questions
Does it help with a weak starter battery?
Yes, the batteries can be connected temporarily (for about 30 seconds) regardless of voltage to transfer energy from the service battery to the starter battery. The unit also allows remote monitoring.
Does it work at 48 V?
No, it is intended only for 12 or 24 V.
Technical specifications
| Brand | Victron Energy |
| Manufacturer | Victron Energy |
| Order number | CYR010400000 |
| EAN | 8719076022251 |
| Operating voltage | 12 / 24 V (automatic) |
| Max. continuous current | 400 A |
| Max. current (1 s) | 2000 A |
| Input voltage | 10 – 36 V DC |
| Overvoltage disconnect | 16 / 32 V |
| Consumption when open | 4 mA |
| Emergency connection | yes, for 30 s |
| Indication | two-colour LED |
| Protection class | IP54 |
| Dimensions (H × W × D) | 78 × 102 × 110 mm |
| Weight | 0.9 kg |
Additional parameters
| Category: | Photovoltaics |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.9 kg |
| EAN: | 8719076022251 |
| Brand: | Victron Energy |
| Manufacturer: | Victron Energy |
| Order number: | CYR010400000 |
| EAN: | 8719076022251 |
| Operating voltage: | 12 / 24 V (automatic) |
| Max. continuous current: | 400 A |
| Max. current (1 s): | 2000 A |
| Input voltage: | 10 – 36 V DC |
| Overvoltage disconnect: | 16 / 32 V |
| Consumption when open: | 4 mA |
| Emergency connection: | yes, for 30 s |
| Indication: | two-colour LED |
| Protection class: | IP54 |
| Dimensions (H × W × D): | 78 × 102 × 110 mm |
| Weight: | 0.9 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
