Victron Energy Energy Meter VM-3P5A meter for 5 A current transformers, 1/3-phase, VE.Can and Ethernet
Code: OST_900300Product detailed description
Victron energy meter for high currents via 5 A transformers
The Victron Energy VM-3P5A is an energy meter for measuring power and energy in single-phase, split-phase and three-phase installations. Use it as a grid meter in a distribution board or to measure the output of a PV inverter, an AC generator, an inverter or an inverter/charger.
It measures current through standard external current transformers with a rated secondary current of 5 A. Current transformers are not included – you choose them according to the current to be measured. The voltage is connected directly.
The meter calculates RMS power values for each phase and transmits them at a refresh rate of 100 ms. This allows accurate measurement of consumption, grid import and grid export, for example in an ESS.
Communication, roles and setup
For communication it has two RJ45 connectors for VE.Can and one RJ45 for Ethernet; VE.Can terminators are included. Modbus UDP is also supported over Ethernet. Data can be shown in the VictronConnect app, on a GX device (Cerbo GX, Ekrano GX) and on the VRM portal.
In most systems it works as a grid meter without any setup. VictronConnect is needed to change the role (Grid Meter, PV Inverter, AC Genset, AC Load Meter), to use a manual IP address instead of DHCP or to enter the primary rated current of the transformers used.
- selectable energy registration: vector, arithmetic or absolute,
- monitoring of line-to-neutral and line-to-line voltage, power factor (IEEE convention) and phase sequence with a wrong-sequence warning,
- data on protective earth voltage and on neutral and phase currents,
- status LED configurable as an energy pulse output for visual diagnostics.
Frequently asked questions
Are current transformers included?
No, standard transformers with a 5 A secondary must be purchased separately.
How is energy shown on the VRM portal?
The meter registers import and export per phase or as a total depending on the GX setting, but the energy balances on VRM are shown as totals only.
Technical specifications
| Brand | Victron Energy |
| Manufacturer | Victron Energy |
| Order number | REL200320100 |
| EAN | 8719076072539 |
| Type | energy meter for current transformers |
| Installations | single-phase, split-phase, three-phase |
| Voltage connection | direct, screw terminals 1.0–2.5 mm² |
| Input voltage L-N | 85–265 V AC |
| Input voltage L-L | 150–460 V AC |
| Frequency | 50/60 Hz |
| Current transformers | 5 A secondary, not included |
| VE.Can | 2× RJ45, terminators included |
| Ethernet | 1× RJ45, Modbus UDP |
| Refresh rate | 100 ms |
| Self-consumption | 1.85 W / 3.5 VA |
| Protection | IP20, indoor only |
| Dimensions (h × w × d) | 90 × 71 × 59 mm |
| Operating temperature | -10 to +55 °C |
| Weight | 0.25 kg |
Additional parameters
| Category: | Photovoltaics |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.25 kg |
| EAN: | 8719076072539 |
| Brand: | Victron Energy |
| Manufacturer: | Victron Energy |
| Order number: | REL200320100 |
| EAN: | 8719076072539 |
| Type: | energy meter for current transformers |
| Installations: | single-phase, split-phase, three-phase |
| Voltage connection: | direct, screw terminals 1.0–2.5 mm² |
| Input voltage L-N: | 85–265 V AC |
| Input voltage L-L: | 150–460 V AC |
| Frequency: | 50/60 Hz |
| Current transformers: | 5 A secondary, not included |
| VE.Can: | 2× RJ45, terminators included |
| Ethernet: | 1× RJ45, Modbus UDP |
| Refresh rate: | 100 ms |
| Self-consumption: | 1.85 W / 3.5 VA |
| Protection: | IP20, indoor only |
| Dimensions (h × w × d): | 90 × 71 × 59 mm |
| Operating temperature: | -10 to +55 °C |
| Weight: | 0.25 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
