Victron Energy MPPT Control display for BlueSolar MPPT solar charge controllers

Code: OST_200230
Not rated Rating details
48,58 € / pcs 39,50 € excl. VAT Measure price:
International delivery
In stock at supplier (1–2 weeks)

Detailed information

Product detailed description

Solar charging at a glance

MPPT Control is a remote display for Victron Energy BlueSolar MPPT solar charge controllers that communicate via the VE.Direct protocol through a four-pin port. It shows how much energy the panels are delivering right now, which charging phase is active and how the last few days went. The controller's operating parameters can also be changed via the display.

The display is not intended for the older MPPT 70/15 model (no longer produced) or for the large BlueSolar MPPT 150/70 and 150/85 controllers, which use a different communication protocol.

What the display shows and sets

  • Live values – panel power and voltage, today's solar yield (kWh), charging phase, battery current and voltage, error messages; with controllers that have a DC output also its status and load current.
  • 30-day history – daily yields, maximum panel power and voltage, maximum battery current, maximum and minimum battery voltage, duration of the Bulk, Absorption and Float phases and the last four errors.
  • Totals – cumulative yield since the start of measurement or reset, voltage extremes and the last four errors.
  • Settings – lock against accidental changes, battery voltage and type, max. charge current, durations and voltages of the Bulk, Absorption and Float phases, DC output mode, history reset, factory reset and display backlight.

Power supply and mounting

The display is powered directly from the controller via a VE.Direct–VE.Direct cable. Alternatively it can be connected directly to the battery with a 2 × 1.5 mm² cable with fuse (total length 1.5 m, included) – useful especially when the controller is set to night sleep mode and the display would otherwise not be powered.

The display is flush-mounted in a wall, electrical box or dashboard in a 52 mm hole. With access from behind it is fixed with a screw ring and the square front bezel is not needed; without rear access, this bezel holds it on the wall.

Frequently asked questions

Does the display work fully with an older controller?
The full range of functions is available from controller firmware 1.17, which all newly sold controllers have. For older units (especially with firmware 1.15 and lower) a firmware update may help.

Does it also show the firmware version?
Yes, the display shows the firmware version and serial number of the controller as well as of the display itself.

Technical parameters

BrandVictron Energy
ManufacturerVictron Energy
Order numberSCC900500000
EAN8719076025641
Typeblue-backlit digital display
CompatibilityBlueSolar MPPT with VE.Direct port (except 70/15, 150/70, 150/85)
Power supply6.5–95 V DC from battery / 5 V from controller
Self-consumption< 4 mA (without backlight)
Operating temperature−20 to +50 °C
Diameter63 mm
Front bezel69 × 69 mm
Mounting holeØ 52 mm
Depth31 mm
Battery cable2 × 1.5 mm², 1.5 m with fuse
Weight0.3 kg

Additional parameters

Category: Photovoltaics
Warranty: 2 years
Weight: 0.3 kg
EAN: 8719076025641
Brand: Victron Energy
Manufacturer: Victron Energy
Order number: SCC900500000
EAN: 8719076025641
Type: blue-backlit digital display
Compatibility: BlueSolar MPPT with VE.Direct port (except 70/15, 150/70, 150/85)
Power supply: 6.5–95 V DC from battery / 5 V from controller
Self-consumption: < 4 mA (without backlight)
Operating temperature: −20 to +50 °C
Diameter: 63 mm
Front bezel: 69 × 69 mm
Mounting hole: Ø 52 mm
Depth: 31 mm
Battery cable: 2 × 1.5 mm², 1.5 m with fuse
Weight: 0.3 kg

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field
Vytvořil Shoptet | Design Shoptak.cz.