Victron Energy MultiPlus-II 48/3000/35-32 hybrid inverter charger 3000 VA, 48 V, ESS
Code: OST_550135Product detailed description
Hybrid inverter charger for off-grid and grid-connected systems
The MultiPlus-II 48/3000/35-32 from Victron Energy combines a powerful sine wave inverter from 48 V DC to 230 V AC, an adaptive battery charger and an ultra-fast transfer switch between the battery and an external AC source. Rated power is 3000 VA, it delivers 2400 W continuously and handles peaks of 5500 W for short periods. Charge current reaches up to 35 A.
The unit offers all functions of the MultiPlus range plus the MultiGrid functions with built-in anti-islanding protection on the AC input – if the distribution grid fails, it prevents unwanted feed-in to the grid. It is a key component of Victron ESS energy storage systems and can be combined with MPPT solar charge controllers as well as grid-tied PV inverters, especially Fronius.
Inputs, outputs and charging
- One AC input – for connecting the distribution grid or, for example, a generator; input current is max. 32 A. If you need two AC inputs, choose a Quattro unit.
- Main output AC1 – supplies connected loads without interruption – if the grid or generator fails, it takes over the supply in less than 20 ms (UPS mode).
- Second output AC2 – is live only when the AC input is available; it suits loads that would quickly drain the batteries, such as a water heater. Its behaviour can be adjusted with assistants.
- PowerControl and PowerAssist – when the grid connection or generator is about to be overloaded, it first reduces charging and then adds power from the battery; with an external current sensor it optimises self-consumption.
- Four-stage adaptive charger – charges lead-acid, alkaline and lithium batteries, and a second output of up to 4 A tops up, for example, a generator starter battery.
Parallel and three-phase operation
Up to 6 MultiPlus-II units can operate in parallel to increase power. Three units of the same type can be configured for three-phase operation with phase shift, and each phase can consist of up to 6 parallel units – up to 18 units in total. The three-phase output is automatically asymmetric, supplies a different amount of energy to each phase and prevents unwanted backflow into the distribution grid.
Configuration
The inverter parameters are set from a computer with the VE.Configure software; to connect to a PC you need the MK3-USB communication interface. Assistants in the software adapt the behaviour of the unit to the specific application.
Frequently asked questions
Is the current sensor included?
No. The external current sensor for PowerControl and PowerAssist with self-consumption optimisation is purchased separately.
Can I connect the grid and a generator at the same time?
The MultiPlus-II has one AC input. If you want two AC sources permanently connected, choose a Quattro unit.
Which batteries can it charge?
The charger is designed for all types of lead-acid, alkaline and lithium batteries with a voltage of 48 V.
Technical specifications
| Brand | Victron Energy |
| Manufacturer | Victron Energy |
| Order number | PMP482305012 |
| EAN | 8719076047582 |
| Model | MultiPlus-II 48/3000/35-32 |
| Battery voltage | 48 V DC |
| Rated power | 3000 VA |
| Continuous power | 2400 W |
| Peak power | 5500 W |
| Max. charge current | 35 A |
| AC input current | max. 32 A |
| Auxiliary charge output | 4 A |
| Grid / output voltage | 230 V AC |
| AC inputs / outputs | 1 / 2 |
| Transfer on outage | within 20 ms |
| Parallel operation | up to 6 units, three-phase up to 18 |
| Dimensions (H × W × D) | 499 × 268 × 141 mm |
| Weight | 18 kg |
Additional parameters
| Category: | Photovoltaics |
|---|---|
| Warranty: | 2 years |
| Weight: | 18 kg |
| EAN: | 8719076047582 |
| Brand: | Victron Energy |
| Manufacturer: | Victron Energy |
| Order number: | PMP482305012 |
| EAN: | 8719076047582 |
| Model: | MultiPlus-II 48/3000/35-32 |
| Battery voltage: | 48 V DC |
| Rated power: | 3000 VA |
| Continuous power: | 2400 W |
| Peak power: | 5500 W |
| Max. charge current: | 35 A |
| AC input current: | max. 32 A |
| Auxiliary charge output: | 4 A |
| Grid / output voltage: | 230 V AC |
| AC inputs / outputs: | 1 / 2 |
| Transfer on outage: | within 20 ms |
| Parallel operation: | up to 6 units, three-phase up to 18 |
| Dimensions (H × W × D): | 499 × 268 × 141 mm |
| Weight: | 18 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
