Victron Energy MultiPlus-II GX 48/5000/70-50 hybrid inverter charger with GX, 5000 VA, 48 V
Code: OST_550149Product detailed description
Inverter charger with built-in GX control
The MultiPlus-II GX 48/5000/70-50 is a MultiPlus-II extended with a built-in GX device and a 2 × 16 character display. It contains a sine wave inverter from 48 V DC to 230 V AC rated at 5000 VA, with 4000 W continuous power and a 9000 W peak, an adaptive charger with up to 70 A and an ultra-fast transfer switch between battery and grid.
The unit offers all functions of the MultiPlus range plus the MultiGrid functions with built-in anti-islanding protection on the AC input – if the distribution grid fails, it prevents unwanted feed-in to the grid. It is a key component of Victron ESS energy storage systems and can be combined with MPPT solar charge controllers as well as grid-tied PV inverters, especially Fronius.
Built-in GX device
The display shows data from the inverter and the solar charge controller. The same data can be accessed from a smartphone or another device via Wi-Fi. The built-in GX corresponds to a separate Venus GX unit and offers these interfaces:
You can monitor and control the system locally or remotely over the internet with the free VRM app and portal – from a phone, tablet or computer. There is therefore no need to buy a separate Venus GX or Color Control GX.
Inputs, outputs and charging
- One AC input – for connecting the distribution grid or, for example, a generator; input current is max. 50 A. If you need two AC inputs, choose a Quattro unit.
- Main output AC1 – supplies connected loads without interruption – if the grid or generator fails, it takes over the supply in less than 20 ms (UPS mode).
- Second output AC2 – is live only when the AC input is available; it suits loads that would quickly drain the batteries, such as a water heater. Its behaviour can be adjusted with assistants.
- PowerControl and PowerAssist – when the grid connection or generator is about to be overloaded, it first reduces charging and then adds power from the battery; with an external current sensor it optimises self-consumption.
- Four-stage adaptive charger – charges lead-acid, alkaline and lithium batteries, and a second output of up to 4 A tops up, for example, a generator starter battery.
Parallel and three-phase operation
Up to 6 MultiPlus-II units can operate in parallel to increase power. Three units of the same type can be configured for three-phase operation with phase shift, and each phase can consist of up to 6 parallel units – up to 18 units in total. The three-phase output is automatically asymmetric, supplies a different amount of energy to each phase and prevents unwanted backflow into the distribution grid. In both parallel and three-phase systems, only one unit needs to be a GX version.
Configuration
A simple installation, such as a UPS, is set up in a few minutes with DIP switches or with VE.Configure 3 software and a computer. Parallel and three-phase systems are configured with VE.Bus Quick Configure (up to three units) or VE.Bus System Configurator, off-grid and hybrid installations with assistants in VE.Configure 3. The MK3-USB interface is needed to connect to a computer. The unit also has several programmable relays and auxiliary contacts.
Frequently asked questions
Is the current sensor included?
No. The external current sensor for PowerControl and PowerAssist with self-consumption optimisation is purchased separately.
Can I connect the grid and a generator at the same time?
The MultiPlus-II has one AC input. If you want two AC sources permanently connected, choose a Quattro unit.
Which batteries can it charge?
The charger is designed for all types of lead-acid, alkaline and lithium batteries with a voltage of 48 V.
Do I need a Venus GX or Color Control GX with it?
No, the GX device is built directly into the unit, including the display and the connection to the VRM portal.
Technical specifications
| Brand | Victron Energy |
| Manufacturer | Victron Energy |
| Order number | PMP482506000 |
| EAN | 8719076048824 |
| Model | MultiPlus-II GX 48/5000/70-50 |
| Battery voltage | 48 V DC |
| Rated power | 5000 VA |
| Continuous power | 4000 W |
| Peak power | 9000 W |
| Max. charge current | 70 A |
| AC input current | max. 50 A |
| Auxiliary charge output | 4 A |
| Grid / output voltage | 230 V AC |
| AC inputs / outputs | 1 / 2 |
| Transfer on outage | within 20 ms |
| Parallel operation | up to 6 units, three-phase up to 18 |
| Built-in GX | VE.Can, USB, Ethernet, VE.Direct |
| Display | 2 × 16 characters |
| Dimensions (H × W × D) | 565 × 323 × 148 mm |
| Weight | 31 kg |
Additional parameters
| Category: | Photovoltaics |
|---|---|
| Warranty: | 2 years |
| Weight: | 31 kg |
| EAN: | 8719076048824 |
| Brand: | Victron Energy |
| Manufacturer: | Victron Energy |
| Order number: | PMP482506000 |
| EAN: | 8719076048824 |
| Model: | MultiPlus-II GX 48/5000/70-50 |
| Battery voltage: | 48 V DC |
| Rated power: | 5000 VA |
| Continuous power: | 4000 W |
| Peak power: | 9000 W |
| Max. charge current: | 70 A |
| AC input current: | max. 50 A |
| Auxiliary charge output: | 4 A |
| Grid / output voltage: | 230 V AC |
| AC inputs / outputs: | 1 / 2 |
| Transfer on outage: | within 20 ms |
| Parallel operation: | up to 6 units, three-phase up to 18 |
| Built-in GX: | VE.Can, USB, Ethernet, VE.Direct |
| Display: | 2 × 16 characters |
| Dimensions (H × W × D): | 565 × 323 × 148 mm |
| Weight: | 31 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
