Victron Energy Orion-Tr 12/12-9A isolated DC/DC converter 12/12 V, 110 W
Code: OST_610036Product detailed description
Stable 12 V from a 12 V circuit
The Orion-Tr 12/12-9A is a professional DC/DC converter from Victron Energy with galvanically isolated input and output. From a battery or on-board supply of 12 V it produces a stabilised 12 V for loads drawing up to 9 A, i.e. 110 W. With the same voltage on input and output it acts as a stabiliser and isolator: sensitive electronics receive a steady voltage even when the battery voltage fluctuates.
The isolated design does not link the negative poles of the input and output circuits, which prevents ground loops and the transfer of interference. IP43 protection and ordinary screw terminals make installation easy in vehicles as well as plant rooms.
Key advantages
- Remote on/off – the converter is controlled by a low-current switch or, for example, an engine start/stop switch, so no heavy-duty switch is needed on the input.
- Parallel operation – the converter is short-circuit proof and any number of units can be paralleled to increase output power.
- IP43 protection – protection against dust and moisture.
- Simple installation – cables connect to screw terminals without special connectors.
Mounting and connection
When mounting, orient the screw terminals downwards. The remote input can be switched by a small switch or an engine start/stop switch; wiring details are given in the manufacturer's manual. The 12 V input model has a built-in input fuse that cannot be replaced.
Frequently asked questions
What is the benefit of an isolated converter?
The input and output circuits are not conductively connected, so interference does not spread between them and no ground loops occur. This matters most for sensitive electronics and when linking two separate systems.
Can I get a higher output current?
Yes. Several converters of the same type can be connected in parallel, with no limit on their number.
Do I need to add an input fuse?
This model has an internal input fuse that cannot be replaced; protect the rest of the wiring according to the manufacturer's manual.
Technical specifications
| Brand | Victron Energy |
| Manufacturer | Victron Energy |
| Order number | ORI121210110 |
| EAN | 8719076016717 |
| Type | isolated DC/DC converter |
| Input voltage | 12 V (8–17 V) |
| Output voltage | 12 V (10–15 V) |
| Output current | 9 A (max. 12.5 A) |
| Power | 110 W |
| Efficiency | 87 % |
| Protection rating | IP43 |
| Remote on/off | yes |
| Parallel connection | yes, unlimited number |
| Input fuse | internal, not replaceable |
| Dimensions (H × W × D) | 100 × 113 × 47 mm |
| Weight | 0.42 kg |
Additional parameters
| Category: | Photovoltaics |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.42 kg |
| EAN: | 8719076016717 |
| Brand: | Victron Energy |
| Manufacturer: | Victron Energy |
| Order number: | ORI121210110 |
| EAN: | 8719076016717 |
| Type: | isolated DC/DC converter |
| Input voltage: | 12 V (8–17 V) |
| Output voltage: | 12 V (10–15 V) |
| Output current: | 9 A (max. 12.5 A) |
| Power: | 110 W |
| Efficiency: | 87 % |
| Protection rating: | IP43 |
| Remote on/off: | yes |
| Parallel connection: | yes, unlimited number |
| Input fuse: | internal, not replaceable |
| Dimensions (H × W × D): | 100 × 113 × 47 mm |
| Weight: | 0.42 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
