Victron Energy Phoenix 24/5000 sine wave inverter 24 V DC to 230 V AC, 4000 W
Code: OST_400104Product detailed description
Powerful 24/5000 sine wave inverter for off-grid systems
The Phoenix 24/5000 is a powerful Victron Energy inverter with a pure sine wave output. It converts 24 V DC from the battery into 230 V AC / 50 Hz and supplies 5000 VA, i.e. 4000 W, continuously; the short-term peak reaches 10000 W. Versions for 12 and 48 V are also available in the range.
A wide input voltage range of 19–33 V DC, 94 % efficiency and a no-load consumption of 30 W (at most 720 Wh per day, only 240 Wh in Search mode) make it ideal for off-grid systems where every harvested watt-hour matters – the inverter can stay switched on and ready.
A robust toroidal transformer, proven in Victron Energy inverters for many years, provides high starting power – for example for LED lamp drivers, halogen lamps or power tools. The inverter is short-circuit proof and protected against overheating, whether due to overload or high ambient temperature. The manufacturer provides a full 5-year warranty.
SinusMax technology with a hybrid HF design delivers a very high initial inrush current, so the inverter also handles demanding loads such as computer power supplies, motors and hand-held power tools.
Settings and monitoring
The inverter has a VE.Direct communication port; with a VE.Direct-USB cable you configure it from a computer in the VictronConnect app. You can set:
- low battery voltage alarm
- voltage level for switching the inverter off and back on when the battery is discharged
- dynamic battery disconnect – the cut-off level depends on the load
- output voltage 210–245 V
- frequency 50 Hz or 60 Hz
- ECO mode on/off and the ECO load sensing level
- alarm relay
You can monitor input and output voltage, load level and alarms.
ECO mode and remote control
When the load drops below a preset value, the inverter switches to standby with a consumption of only about 1.9 W. At adjustable intervals (by default every 2.5 seconds) it briefly switches on, and if the load exceeds the preset level it starts up fully again. A remote on/off switch or a relay contact can be connected to the two-pole connector.
Connection
The inverter is connected to the 24 V battery with 2+2 M8 bolts; the 230 V AC output uses screw terminals. Battery cables are not included. In a solar system, the inverter is complemented by an MPPT charge controller that charges the battery from PV panels.
Frequently asked questions
Does this inverter have Bluetooth?
No, this version does not have it built in. Settings and monitoring are done via the VE.Direct port and a VE.Direct-USB cable. If you want cable-free control from a phone, choose the Phoenix Inverter Smart version.
Can the inverter handle power tools?
Yes. The toroidal transformer provides the high starting power needed by power tools, halogen lamps or LED lamp drivers, for example. For short periods the inverter delivers up to 10000 W.
How much does it consume when running without a load?
Without a load 30 W, i.e. at most 720 Wh per day; in Search mode the daily consumption drops to 240 Wh. In ECO standby it draws about 1.9 W.
Technical specifications
| Brand | Victron Energy |
| Manufacturer | Victron Energy |
| Order number | PIN245020000 |
| EAN | 8719076023760 |
| Battery voltage | 24 V DC |
| Input voltage range | 19–33 V DC |
| Output voltage | 230 V AC, 50 Hz, pure sine wave |
| Continuous power | 5000 VA / 4000 W |
| Peak power | 10000 W |
| Efficiency | 94 % |
| No-load consumption | 30 W |
| Consumption in ECO mode | 1.9 W |
| Adjustable output voltage | 210–245 V |
| Communication | VE.Direct |
| Battery connection | 2+2 M8 bolts |
| 230 V AC connection | screw terminals |
| Dimensions (H × W × D) | 444 × 328 × 240 mm |
| Weight | 31 kg |
| Warranty | 5 years |
Additional parameters
| Category: | Photovoltaics |
|---|---|
| Warranty: | 2 years |
| Weight: | 31 kg |
| EAN: | 8719076023760 |
| Brand: | Victron Energy |
| Manufacturer: | Victron Energy |
| Order number: | PIN245020000 |
| EAN: | 8719076023760 |
| Battery voltage: | 24 V DC |
| Input voltage range: | 19–33 V DC |
| Output voltage: | 230 V AC, 50 Hz, pure sine wave |
| Continuous power: | 5000 VA / 4000 W |
| Peak power: | 10000 W |
| Efficiency: | 94 % |
| No-load consumption: | 30 W |
| Consumption in ECO mode: | 1.9 W |
| Adjustable output voltage: | 210–245 V |
| Communication: | VE.Direct |
| Battery connection: | 2+2 M8 bolts |
| 230 V AC connection: | screw terminals |
| Dimensions (H × W × D): | 444 × 328 × 240 mm |
| Weight: | 31 kg |
| Warranty: | 5 years |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
