Victron Energy Phoenix 48/5000 pure sine wave inverter 48 V DC / 230 V AC, 5000 VA
Code: OST_400006Product detailed description
Pure sine wave from a 48 V battery
The Victron Energy Phoenix 48/5000 converts the 48 V DC battery voltage into 230 V AC with a pure sine waveform. It delivers 5000 VA continuously, i.e. 4000 W of active power, and briefly handles a peak of 10000 W. It is suited to larger off-grid systems with a 48 V battery bank.
The input accepts an exceptionally wide voltage range of 38 – 66 V DC and efficiency reaches 95 %. No-load self-consumption is just 35 W, which amounts to no more than 840 Wh per day; in load search mode it is only 360 Wh. The inverter can therefore stay switched on permanently – a major advantage in off-grid systems where every watt-hour counts. The manufacturer provides a 5-year warranty on Phoenix inverters.
SinusMax technology and protection
Hybrid high-frequency SinusMax technology combines compact dimensions and low weight with a very high surge current. The inverter therefore easily starts demanding loads – computer power supplies, motors, hand-held power tools or power supplies for LED and halogen lights.
Inside works a robust toroidal transformer that has proven itself in Victron Energy inverters for many years. The inverter is short-circuit proof and protected against overheating caused by overload or high ambient temperature.
Settings and monitoring
The inverter has a VE.Direct communication port. Using a VE.Direct–USB cable you connect it to a computer and set parameters and monitor operation in the free VictronConnect app.
- low battery voltage alarm and alarm relay
- voltage level for shutdown and restart with a discharged battery
- dynamic cut-off – the disconnect threshold depends on the load
- output voltage 210 – 245 V and frequency 50 or 60 Hz
- ECO mode on or off and its sensing level
You can monitor input and output voltage, load level and alarms. A remote on/off switch or relay contact can be connected to the two-pole connector.
How ECO mode works
When the load demand drops below the set threshold, the inverter switches to standby with a consumption of approximately 1.9 W. At regular intervals – every 2.5 seconds by default – it briefly wakes up and checks the load. As soon as the power demand exceeds the set value, it switches fully back on.
Frequently asked questions
Can the inverter stay on all the time?
Yes. At no load it draws 35 W, i.e. no more than 840 Wh per day, and in ECO mode only about 1.9 W.
Are battery cables included?
No, battery cables have to be purchased separately in the length and cross-section your installation requires. The battery connects to 2+2 M8 terminals, the 230 V output via screw terminals.
Can it start a motor or power tool?
Thanks to SinusMax technology, yes – it briefly supplies up to 10000 W. In continuous operation, however, the load must not exceed the continuous rating of 4000 W.
Is it available for other battery voltages?
Yes, the same power class is also available for 12 / 24 V batteries.
Technical specifications
| Brand | Victron Energy |
| Manufacturer | Victron Energy |
| Order number | PIN485020000 |
| EAN | 8719076023883 |
| Model | Phoenix 48/5000 |
| Battery voltage | 48 V DC |
| Input voltage range | 38 – 66 V DC |
| Output voltage | 230 V AC, 50 Hz |
| Output setting | 210 – 245 V, 50 / 60 Hz |
| Continuous power | 5000 VA / 4000 W |
| Peak power | 10000 W |
| Max. efficiency | 95 % |
| No-load consumption | 35 W |
| Consumption in ECO mode | 1.9 W |
| Communication | VE.Direct |
| Battery connection | 2+2 M8 terminals |
| Dimensions (H × W × D) | 444 × 328 × 240 mm |
| Weight | 31 kg |
| Warranty | 5 years |
Additional parameters
| Category: | Photovoltaics |
|---|---|
| Warranty: | 2 years |
| Weight: | 31 kg |
| EAN: | 8719076023883 |
| Brand: | Victron Energy |
| Manufacturer: | Victron Energy |
| Order number: | PIN485020000 |
| EAN: | 8719076023883 |
| Model: | Phoenix 48/5000 |
| Battery voltage: | 48 V DC |
| Input voltage range: | 38 – 66 V DC |
| Output voltage: | 230 V AC, 50 Hz |
| Output setting: | 210 – 245 V, 50 / 60 Hz |
| Continuous power: | 5000 VA / 4000 W |
| Peak power: | 10000 W |
| Max. efficiency: | 95 % |
| No-load consumption: | 35 W |
| Consumption in ECO mode: | 1.9 W |
| Communication: | VE.Direct |
| Battery connection: | 2+2 M8 terminals |
| Dimensions (H × W × D): | 444 × 328 × 240 mm |
| Weight: | 31 kg |
| Warranty: | 5 years |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
