Victron Energy Phoenix Inverter Smart 48/5000 sine wave inverter 48 V DC to 230 V AC with Bluetooth, 4000 W
Code: OST_400109Product detailed description
Powerful 48/5000 sine wave inverter for off-grid systems
The Phoenix Inverter Smart 48/5000 is a fully programmable inverter with a pure sine wave output, built-in Bluetooth and ECO mode. It converts 48 V DC from the battery into 230 V AC / 50 Hz and supplies 5000 VA, i.e. 4000 W, continuously; the short-term peak reaches 10000 W.
An exceptionally wide input voltage range of 37.2–68 V DC, 95 % efficiency and a no-load consumption of 15 W (at most 360 Wh per day) make it ideal for off-grid systems where every harvested watt-hour matters – the inverter can stay switched on and ready. In ECO mode, consumption at zero load drops to 2.8 W, i.e. at most 67.2 Wh per day.
A robust toroidal transformer, proven in Victron Energy inverters for many years, provides high starting power – for example for LED lamp drivers, halogen lamps or power tools. The inverter is short-circuit proof and protected against overheating, whether due to overload or high ambient temperature. The manufacturer provides a full 5-year warranty.
Settings and monitoring
Thanks to built-in Bluetooth, you configure the inverter wirelessly from a phone or tablet in the free VictronConnect app. You can set:
- low battery voltage alarm
- voltage level for switching the inverter off and back on when the battery is discharged
- dynamic battery disconnect – the cut-off level depends on the load
- output voltage 210–245 V
- frequency 50 Hz or 60 Hz
- ECO mode on/off and the ECO load sensing level
- alarm relay
You can monitor input and output voltage, load level and alarms. If you prefer a cable and a computer, the inverter also has a VE.Direct port for a VE.Direct-USB cable.
ECO mode and remote control
When the load drops below a preset value, the inverter switches to standby with a consumption of only about 2.8 W. At adjustable intervals (by default every 2.5 seconds) it briefly switches on, and if the load exceeds the preset level it starts up fully again. A remote on/off switch or a relay contact can be connected to the two-pole connector.
Connection
The inverter is connected to the 48 V battery with M8 bolts; the 230 V AC output uses screw terminals. Battery cables are not included. In a solar system, the inverter is complemented by an MPPT charge controller that charges the battery from PV panels.
Frequently asked questions
Do I need a computer to configure it?
No. Thanks to built-in Bluetooth, a phone or tablet with the VictronConnect app is enough. The VE.Direct-USB cable is just an alternative for those who prefer a computer.
Can the inverter handle power tools?
Yes. The toroidal transformer provides the high starting power needed by power tools, halogen lamps or LED lamp drivers, for example. For short periods the inverter delivers up to 10000 W.
How much does it consume when running without a load?
Without a load 15 W, i.e. at most 360 Wh per day. In ECO mode only 2.8 W, i.e. at most 67.2 Wh per day.
Technical specifications
| Brand | Victron Energy |
| Manufacturer | Victron Energy |
| Order number | PIN482500000 |
| EAN | 8719076047940 |
| Battery voltage | 48 V DC |
| Input voltage range | 37.2–68 V DC |
| Output voltage | 230 V AC, 50 Hz, pure sine wave |
| Continuous power | 5000 VA / 4000 W |
| Peak power | 10000 W |
| Efficiency | 95 % |
| No-load consumption | 15 W |
| Consumption in ECO mode | 2.8 W |
| Adjustable output voltage | 210–245 V |
| Communication | Bluetooth (VictronConnect), VE.Direct |
| Battery connection | M8 bolts |
| 230 V AC connection | screw terminals |
| Dimensions (H × W × D) | 555 × 295 × 160 mm |
| Weight | 31 kg |
| Warranty | 5 years |
Additional parameters
| Category: | Photovoltaics |
|---|---|
| Warranty: | 2 years |
| Weight: | 31 kg |
| EAN: | 8719076047940 |
| Brand: | Victron Energy |
| Manufacturer: | Victron Energy |
| Order number: | PIN482500000 |
| EAN: | 8719076047940 |
| Battery voltage: | 48 V DC |
| Input voltage range: | 37.2–68 V DC |
| Output voltage: | 230 V AC, 50 Hz, pure sine wave |
| Continuous power: | 5000 VA / 4000 W |
| Peak power: | 10000 W |
| Efficiency: | 95 % |
| No-load consumption: | 15 W |
| Consumption in ECO mode: | 2.8 W |
| Adjustable output voltage: | 210–245 V |
| Communication: | Bluetooth (VictronConnect), VE.Direct |
| Battery connection: | M8 bolts |
| 230 V AC connection: | screw terminals |
| Dimensions (H × W × D): | 555 × 295 × 160 mm |
| Weight: | 31 kg |
| Warranty: | 5 years |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
