Victron Energy Smart BatteryProtect BP-100 48 battery deep-discharge protection 48 V, 100 A, Bluetooth

Code: OST_320226
Not rated Rating details
495,76 € –73 %
1739181608 88885f8c
495,76 € –73 % 132,23 € / pcs 107,50 € excl. VAT Measure price:
International delivery
In stock at supplier (1–2 weeks)

Detailed information

Product detailed description

Protection against deep discharge

The Victron Energy Smart BatteryProtect BP-100 48 disconnects less important loads from the battery before it is completely discharged and damaged, or while enough energy remains to start an engine. It is designed for 48 V systems and currents up to 100 A.

It switches with MOSFET transistors instead of relays, so no sparks occur during switching. Self-consumption is very low, which is especially valuable for lithium batteries after a low-voltage disconnect.

Settings and functions

  • Bluetooth – set the load connect and disconnect levels in the free VictronConnect app from a smartphone, tablet or computer; Bluetooth can be switched off if required.
  • Programming pin – alternatively select one of nine preset levels; the selected setting is shown on the 7-segment display.
  • Li-ion mode – the protector can be controlled by a VE.Bus BMS.
  • Overvoltage protection – disconnects the load when the DC voltage exceeds 64 V, protecting sensitive equipment.
  • Delayed alarm output – activates when the voltage stays below the set threshold for more than 12 s, so engine cranking does not trigger it; the output handles max. 500 mA and can switch a buzzer, light, charger or generator.
  • Delayed disconnect – the load is disconnected 90 s after the alarm; if the voltage rises in the meantime (alternator, charger), no disconnect takes place.

Wiring

BatteryProtect is unidirectional: current may only flow from the IN terminal to the OUT terminal. Reverse current from OUT to IN is not permitted and will damage the unit. It is therefore wired into the load circuit, not between the battery and a charging source.

Frequently asked questions

Can I charge the battery through BatteryProtect?
No. Current may only flow from IN to OUT; connect chargers and charge controllers directly to the battery.

Do I need a phone to set it up?
Not necessarily – one of the nine presets can also be selected with the programming pin. The VictronConnect app, however, lets you set exact values.

Technical specifications

BrandVictron Energy
ManufacturerVictron Energy
Order numberBPR110048000
EAN8719076041252
System voltage48 V
Max. current100 A
Switching elementMOSFET
ConfigurationBluetooth (VictronConnect), programming pin
Presets9 levels
Display7-segment
Alarm outputmax. 500 mA, 12 s delay
Load disconnect90 s after alarm
Overvoltage disconnect> 64 V
Li-ion modecontrolled via VE.Bus BMS
Current directionIN → OUT only
Weight0.8 kg

Additional parameters

Category: Photovoltaics
Warranty: 2 years
Weight: 0.8 kg
EAN: 8719076041252
Brand: Victron Energy
Manufacturer: Victron Energy
Order number: BPR110048000
EAN: 8719076041252
System voltage: 48 V
Max. current: 100 A
Switching element: MOSFET
Configuration: Bluetooth (VictronConnect), programming pin
Presets: 9 levels
Display: 7-segment
Alarm output: max. 500 mA, 12 s delay
Load disconnect: 90 s after alarm
Overvoltage disconnect: > 64 V
Li-ion mode: controlled via VE.Bus BMS
Current direction: IN → OUT only
Weight: 0.8 kg

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field
Vytvořil Shoptet | Design Shoptak.cz.