Victron Energy Smart BatteryProtect BP-220 12/24 battery deep-discharge protection 12/24 V, 220 A, Bluetooth
Code: OST_320227Product detailed description
Protection against deep discharge
The Victron Energy Smart BatteryProtect BP-220 12/24 disconnects less important loads from the battery before it is completely discharged and damaged, or while enough energy remains to start an engine. It is designed for 12/24 V systems and currents up to 220 A. It detects the 12 or 24 V system voltage automatically and adjusts itself accordingly.
It switches with MOSFET transistors instead of relays, so no sparks occur during switching. Self-consumption is very low, which is especially valuable for lithium batteries after a low-voltage disconnect.
Settings and functions
- Bluetooth – set the load connect and disconnect levels in the free VictronConnect app from a smartphone, tablet or computer; Bluetooth can be switched off if required.
- Programming pin – alternatively select one of nine preset levels; the selected setting is shown on the 7-segment display.
- Li-ion mode – the protector can be controlled by a VE.Bus BMS.
- Overvoltage protection – disconnects the load when the voltage exceeds 16 V in a 12 V system or 32 V in a 24 V system, protecting sensitive equipment.
- Delayed alarm output – activates when the voltage stays below the set threshold for more than 12 s, so engine cranking does not trigger it; the output handles max. 500 mA and can switch a buzzer, light, charger or generator.
- Delayed disconnect – the load is disconnected 90 s after the alarm; if the voltage rises in the meantime (alternator, charger), no disconnect takes place.
Wiring
BatteryProtect is unidirectional: current may only flow from the IN terminal to the OUT terminal. Reverse current from OUT to IN is not permitted and will damage the unit. It is therefore wired into the load circuit, not between the battery and a charging source.
Frequently asked questions
Can I charge the battery through BatteryProtect?
No. Current may only flow from IN to OUT; connect chargers and charge controllers directly to the battery.
Do I need a phone to set it up?
Not necessarily – one of the nine presets can also be selected with the programming pin. The VictronConnect app, however, lets you set exact values.
Technical specifications
| Brand | Victron Energy |
| Manufacturer | Victron Energy |
| Order number | BPR122022000 |
| EAN | 8719076041269 |
| System voltage | 12 / 24 V (automatic detection) |
| Max. current | 220 A |
| Switching element | MOSFET |
| Configuration | Bluetooth (VictronConnect), programming pin |
| Presets | 9 levels |
| Display | 7-segment |
| Alarm output | max. 500 mA, 12 s delay |
| Load disconnect | 90 s after alarm |
| Overvoltage disconnect | 16 V / 32 V |
| Li-ion mode | controlled via VE.Bus BMS |
| Current direction | IN → OUT only |
| Weight | 0.912 kg |
Additional parameters
| Category: | Photovoltaics |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.912 kg |
| EAN: | 8719076041269 |
| Brand: | Victron Energy |
| Manufacturer: | Victron Energy |
| Order number: | BPR122022000 |
| EAN: | 8719076041269 |
| System voltage: | 12 / 24 V (automatic detection) |
| Max. current: | 220 A |
| Switching element: | MOSFET |
| Configuration: | Bluetooth (VictronConnect), programming pin |
| Presets: | 9 levels |
| Display: | 7-segment |
| Alarm output: | max. 500 mA, 12 s delay |
| Load disconnect: | 90 s after alarm |
| Overvoltage disconnect: | 16 V / 32 V |
| Li-ion mode: | controlled via VE.Bus BMS |
| Current direction: | IN → OUT only |
| Weight: | 0.912 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
