Victron Energy SmartSolar MPPT 250/100-Tr VE.Can solar charge controller 12/24/48 V with Bluetooth
Code: OST_200248Product detailed description
Powerful MPPT controller with built-in Bluetooth
The SmartSolar MPPT 250/100-Tr VE.Can is a solar charge controller from the Victron Energy SmartSolar range. It detects the battery voltage of 12, 24 or 48 V automatically and charges with up to 100 A. With a 48 V battery you can connect a PV array of up to 5800 W; if more panels are installed, the controller safely limits its power to this maximum.
The input voltage of up to 250 V allows up to five common PV panels to be connected in series (depending on the specific panel type). Efficiency reaches 98 % and self-consumption is below 35 mA. The manufacturer provides an above-standard warranty of 5 years.
What it offers in addition to the BlueSolar range
- Built-in Bluetooth – live values, history and parameter settings in the VictronConnect mobile app for iOS and Android.
- Plug-in display – optional accessory (not included) that plugs into the connector on the front of the controller.
- Remote on/off input – an external device can switch the controller off and on.
- Programmable relay – for example as an alarm relay, which can also be set up via a phone.
Connection and operation
During installation always connect the battery first and only then the PV panels. When removing, proceed in reverse order – disconnect the panels first and only then the battery. The terminals accept conductors up to 35 mm². Charging follows an adaptive multi-stage algorithm with temperature compensation, and the controller protects against battery reverse polarity (fuse), output short circuit and high temperature. To protect against overvoltage from the PV array we recommend adding a CITEL surge protector.
Frequently asked questions
How many panels can I connect in series?
The open-circuit voltage of the PV array must not exceed 250 V (absolute maximum at low temperatures); for normal operation a maximum of 230 V is recommended, which, depending on the panel type, corresponds to at most five common panels. If it is exceeded, the controller shuts down safely and reports an overvoltage alarm.
Can I use the controller with panel optimisers?
No. Victron Energy MPPT controllers must not be combined with PV panel optimisers – both devices could be damaged.
What minimum voltage must the panels supply?
The PV array voltage must be at least 5 V higher than the battery voltage.
Technical parameters
| Brand | Victron Energy |
| Manufacturer | Victron Energy |
| Order number | SCC125110412 |
| EAN | 8719076055662 |
| Battery voltage | 12 / 24 / 48 V (automatic) |
| Max. charge current | 100 A |
| Max. PV array power | 1450 W (12 V) / 2900 W (24 V) / 5800 W (48 V) |
| Max. PV open-circuit voltage | 250 V (230 V recommended) |
| Max. PV short-circuit current | 70 A |
| Max. efficiency | 98 % |
| Self-consumption | < 35 mA |
| Absorption voltage | 14.4 / 28.8 / 57.6 V |
| Float voltage | 13.8 / 27.6 / 55.2 V |
| Charge algorithm | adaptive multi-stage |
| Communication | Bluetooth (VictronConnect) |
| Operating temperature | −30 to +60 °C (full output up to 40 °C) |
| Protection rating | IP43 electronics / IP22 connection area |
| Dimensions (H × L × D) | 216 × 295 × 103 mm |
| Weight | 4.5 kg |
| Warranty | 5 years |
Additional parameters
| Category: | Photovoltaics |
|---|---|
| Warranty: | 2 years |
| Weight: | 4.5 kg |
| EAN: | 8719076055662 |
| Brand: | Victron Energy |
| Manufacturer: | Victron Energy |
| Order number: | SCC125110412 |
| EAN: | 8719076055662 |
| Battery voltage: | 12 / 24 / 48 V (automatic) |
| Max. charge current: | 100 A |
| Max. PV array power: | 1450 W (12 V) / 2900 W (24 V) / 5800 W (48 V) |
| Max. PV open-circuit voltage: | 250 V (230 V recommended) |
| Max. PV short-circuit current: | 70 A |
| Max. efficiency: | 98 % |
| Self-consumption: | < 35 mA |
| Absorption voltage: | 14.4 / 28.8 / 57.6 V |
| Float voltage: | 13.8 / 27.6 / 55.2 V |
| Charge algorithm: | adaptive multi-stage |
| Communication: | Bluetooth (VictronConnect) |
| Operating temperature: | −30 to +60 °C (full output up to 40 °C) |
| Protection rating: | IP43 electronics / IP22 connection area |
| Dimensions (H × L × D): | 216 × 295 × 103 mm |
| Weight: | 4.5 kg |
| Warranty: | 5 years |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
