Victron Energy SmartSolar MPPT RS 450/200-MC4 solar charge controller 48 V, 200 A, 4 MPPT
Code: OST_200257Product detailed description
Controller for large high-voltage PV arrays
The SmartSolar MPPT RS 450/200-MC4 is a solar charge controller designed exclusively for 48 V batteries. It operates with a PV voltage in the range of 80 – 450 V, charging starts at 120 V and it delivers up to 200 A to the battery. The maximum PV array power is 11.5 kW; if a larger array is installed, the controller is not damaged but safely limits its output. It suits large off-grid systems as well as grid-connected systems where a larger number of panels is connected in series.
Four independent MPPT trackers let you adapt the system to the specific installation site, and advanced maximum power point detection helps even under partial shading. The charge algorithm is fully programmable and eight preset battery types are available.
Features and safety
- Galvanically isolated PV inputs – full isolation between the PV and battery side increases the safety of the whole system.
- Insulation resistance monitoring – the controller continuously monitors the PV array and detects faults that reduce panel insulation to a dangerous level.
- Display and Bluetooth – operating states directly on the unit, settings and history in the VictronConnect app.
- VE.Direct and VE.Can – connection to a GX device, monitoring, data transfer and remote firmware updates; up to 25 units can be synchronised via VE.Can.
- Inputs and outputs – programmable relay, temperature sensor, auxiliary and digital input, voltage sensor; the remote input accepts a signal from a Victron BMS.
Installation
The PV open-circuit voltage must not exceed 450 V. As it rises with falling temperature, a maximum of 400 V is recommended for normal operation. The short-circuit current per tracker may be at most 20 A, otherwise permanent damage may occur. Panels are connected with MC4 connectors, the terminal block is rated for 16 mm².
Frequently asked questions
Which batteries is it intended for?
Only for 48 V batteries. From the factory the absorption voltage is set to 57.6 V and the float voltage to 55.2 V; charging is controlled by an adaptive multi-stage algorithm.
Can I use panel optimisers?
No. Victron Energy MPPT controllers must not be combined with PV panel optimisers – both devices may be damaged.
What if my panels have a higher output?
The controller is not damaged; it automatically limits the incoming power to 11.5 kW.
Technical specifications
| Brand | Victron Energy |
| Manufacturer | Victron Energy |
| Order number | SCC145120512 |
| EAN | 8719076062745 |
| Battery voltage | 48 V |
| Max. charge current | 200 A |
| Max. PV array power | 11.5 kW |
| Max. PV open-circuit voltage | 450 V (recommended 400 V) |
| MPPT voltage range | 80 – 450 V |
| PV start-up voltage | 120 V |
| Number of MPPT trackers | 4 |
| Max. PV short-circuit current | 20 A per tracker |
| Max. efficiency | 96 % |
| Absorption / float voltage | 57.6 V / 55.2 V |
| PV connection | MC4 connectors |
| Communication | Bluetooth, VE.Direct, VE.Can |
| Protection class | IP43 electronics / IP22 connection area |
| Dimensions (H × L × D) | 487 × 434 × 146 mm |
| Weight | 13.7 kg |
Additional parameters
| Category: | Photovoltaics |
|---|---|
| Warranty: | 2 years |
| Weight: | 13.7 kg |
| EAN: | 8719076062745 |
| Brand: | Victron Energy |
| Manufacturer: | Victron Energy |
| Order number: | SCC145120512 |
| EAN: | 8719076062745 |
| Battery voltage: | 48 V |
| Max. charge current: | 200 A |
| Max. PV array power: | 11.5 kW |
| Max. PV open-circuit voltage: | 450 V (recommended 400 V) |
| MPPT voltage range: | 80 – 450 V |
| PV start-up voltage: | 120 V |
| Number of MPPT trackers: | 4 |
| Max. PV short-circuit current: | 20 A per tracker |
| Max. efficiency: | 96 % |
| Absorption / float voltage: | 57.6 V / 55.2 V |
| PV connection: | MC4 connectors |
| Communication: | Bluetooth, VE.Direct, VE.Can |
| Protection class: | IP43 electronics / IP22 connection area |
| Dimensions (H × L × D): | 487 × 434 × 146 mm |
| Weight: | 13.7 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
