Victron MultiPlus-II GX 24/3000/70-32 hybrid inverter/charger with GX and display 24 V 3000 VA, pure sine wave
Code: OST_550159Product detailed description
MultiPlus-II with its own system brain
Victron MultiPlus-II GX 24/3000/70-32 is a combination of a sine wave inverter and charger which, compared with a standard MultiPlus-II, additionally has a built-in GX device (similar to Venus GX) and a 2 × 16 character display. The display shows the parameters of the inverter and the solar charge controller; the same data are also available from a smartphone or another Wi-Fi device.
The unit combines the functions of MultiPlus and MultiGrid: an external current sensor is available for PowerControl and PowerAssist with self-consumption optimisation (max. 32 A), and built-in anti-islanding protection on the AC input prevents unwanted feeding into the grid when it fails. Continuous power is 2400 W, peak power 5500 W.
This version is designed for a 24 V battery bank, which is a sensible compromise between the size of the DC-side currents and the number of battery cells.
Key advantages
- integrated GX: VE.Can, USB, Ethernet and VE.Direct
- one AC input and two AC outputs – AC-out-1 uninterrupted (UPS within 20 ms), AC-out-2 only when the grid is available
- adaptive 4-stage charging up to 70 A for lead-acid, alkaline and lithium batteries
- 4 A auxiliary charging output, e.g. for a generator starter battery
- key element of the Victron ESS system
- programmable relays and auxiliary contacts
Connection and use
MultiPlus-II GX is combined with solar MPPT charge controllers or with grid-tie PV inverters. Connect loads that must not fail to the main output AC-out-1; AC-out-2 is for loads that would quickly drain the battery, such as a water heater – these are supplied only from the grid or generator. You monitor the system locally or from anywhere through the free VRM app and portal.
Frequently asked questions
Do I need a Cerbo GX or Venus GX with it?
No. The GX device is built into the unit, so a separate Venus GX or Color Control GX is not needed. In parallel and three-phase systems one unit in the GX version is sufficient.
How many units can be combined?
Up to 6 units in parallel; three units of the same type form a three-phase system and each phase can consist of up to 6 units – in total up to 18 units with a combined continuous output of 43.2 kW / 54 kVA and 630 A of charge current.
What is it configured with?
A simple installation (e.g. UPS) is set up in a few minutes with DIP switches or with VE.Configure 3. Parallel and three-phase systems are configured with VE.Bus Quick Configure or VE.Bus System Configurator; working with a PC requires the MK3-USB interface.
Technical parameters
| Brand | Victron Energy |
| Manufacturer | Victron Energy |
| Order number | PMP242306000 |
| EAN | 8719076051695 |
| Battery voltage | 24 V DC |
| Rated inverter power | 3000 VA |
| Continuous power at 25 °C | 2400 W |
| Peak power | 5500 W |
| Max. charge current | 70 A |
| AC input transfer current | 32 A |
| Number of AC inputs | 1 |
| Number of AC outputs | 2 |
| Switchover time on outage | ≤ 20 ms |
| Integrated GX interfaces | VE.Can, USB, Ethernet, VE.Direct |
| Weight | 19 kg |
Additional parameters
| Category: | Photovoltaics |
|---|---|
| Warranty: | 2 years |
| Weight: | 19 kg |
| EAN: | 8719076051695 |
| Brand: | Victron Energy |
| Manufacturer: | Victron Energy |
| Order number: | PMP242306000 |
| EAN: | 8719076051695 |
| Battery voltage: | 24 V DC |
| Rated inverter power: | 3000 VA |
| Continuous power at 25 °C: | 2400 W |
| Peak power: | 5500 W |
| Max. charge current: | 70 A |
| AC input transfer current: | 32 A |
| Number of AC inputs: | 1 |
| Number of AC outputs: | 2 |
| Switchover time on outage: | ≤ 20 ms |
| Integrated GX interfaces: | VE.Can, USB, Ethernet, VE.Direct |
| Weight: | 19 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
