Victron Quattro 12/5000/220-100/100 hybrid inverter/charger with 2 AC inputs 12 V 5000 VA, pure sine wave
Code: OST_550161Product detailed description
Two sources, one inverter
Victron Quattro 12/5000/220-100/100 is a hybrid photovoltaic inverter with a pure sine wave output, a powerful battery charger and a very fast transfer switch between the grid (generator) and the batteries. It is housed in a compact aluminium enclosure; the Quattro series is made in power ratings from 3000 to 15000 VA and the manufacturer gives a 5-year warranty.
The main difference from the MultiPlus series is two mutually independent AC inputs – for example the grid and a generator, or two generators. The Quattro automatically connects to whichever source is currently available. Continuous power is 4000 W.
This version works with a 12 V battery bank. At low voltage the currents on the DC side are high, so use adequately sized and as short as possible battery cables.
Key advantages
- two AC inputs with automatic selection of the active source
- uninterrupted main output (switchover within 20 ms), second output only when an AC source is present
- 4-stage adaptive charging up to 220 A and an auxiliary output for a starter battery
- PowerControl – adjustable current limit on each AC input
- PowerAssist – supplementing a generator or weak grid connection from the battery
- up to 10 units in parallel, three-phase configuration
Connection and use
Loads that must not fail belong on the main output – computers and electronics keep running during a switchover within 20 ms. The second output is live only when AC is available on one of the inputs; connect loads such as a water heater, air conditioning or an electric oven, which would quickly drain the battery. In off-grid systems with solar panels or other alternative sources it provides AC power even when the grid fails.
Frequently asked questions
When should I choose Quattro instead of MultiPlus?
When you want two AC sources permanently connected, for example the grid and a generator. The Quattro switches between them automatically.
Can the Quattro be connected in parallel or in three phases?
Yes. Up to 10 units can operate in parallel and three units of the same model form a three-phase output; up to 10 three-phase sets, i.e. 30 units, can be connected in parallel.
Is a computer needed for configuration?
Not necessarily. Basic settings and even parallel operation are done with the built-in DIP switches in a few minutes. Extended options are offered by the VE.Net control panel or by VE.Bus Quick Configure, VE.Bus System Configurator and VE.Configure software.
Technical parameters
| Brand | Victron Energy |
| Manufacturer | Victron Energy |
| Order number | QUA125020000 |
| EAN | 8719076024118 |
| Battery voltage | 12 V DC |
| Rated inverter power | 5000 VA |
| Continuous power at 25 °C | 4000 W |
| Max. charge current | 220 A |
| AC input transfer current | 2 × 100 A |
| Number of AC inputs | 2 |
| Number of AC outputs | 2 |
| Switchover time on outage | ≤ 20 ms |
| Dimensions (H × W × D) | 470 × 350 × 280 mm |
| Weight | 36.5 kg |
| Manufacturer warranty | 5 years |
Additional parameters
| Category: | Photovoltaics |
|---|---|
| Warranty: | 2 years |
| Weight: | 36.5 kg |
| EAN: | 8719076024118 |
| Brand: | Victron Energy |
| Manufacturer: | Victron Energy |
| Order number: | QUA125020000 |
| EAN: | 8719076024118 |
| Battery voltage: | 12 V DC |
| Rated inverter power: | 5000 VA |
| Continuous power at 25 °C: | 4000 W |
| Max. charge current: | 220 A |
| AC input transfer current: | 2 × 100 A |
| Number of AC inputs: | 2 |
| Number of AC outputs: | 2 |
| Switchover time on outage: | ≤ 20 ms |
| Dimensions (H × W × D): | 470 × 350 × 280 mm |
| Weight: | 36.5 kg |
| Manufacturer warranty: | 5 years |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
