PPSU press end cap 32, IVAR.Z PPSU (82832820)
Code: 82832820Product detailed description
Code 82832820 is a press cap for pipe with a diameter of 32 mm. It seals the end of a line that will be extended later or stay closed.
- Use: capping ALPEX, TURATEC and PEX pipe, for example during a pressure test or on a spare branch.
- Operation: PN 10, temperature +3 to +95 °C.
- Material: PPSU body, EPDM seal, AISI 304 stainless steel press sleeve and polycarbonate locking ring.
- Weight: 34 g.
The fittings hold a hygiene approval for drinking water. Joints may be buried in floors, shafts and under plaster and can be pressurised straight after pressing; no open flame is needed. Press according to the system manufacturer's instructions.
For sizes 16 to 32 mm this works as a safeguard: an unpressed joint leaks during a pressure test between 1 and 6.5 bar and gives itself away by escaping water.
Technical data
| Code | 82832820 |
| Manufacturer | IVAR |
| Type | IVAR.Z PPSU |
| Size | 32 mm |
| Max. working pressure | PN 10 |
| Temperature range | +3 … +95 °C |
| Body material | PPSU |
| Weight | 34 g |
Frequently asked questions
What is the 32 mm cap for?
It closes the end of an ALPEX, TURATEC or PEX pipe of 32 mm, for example on a spare branch.
Which operating conditions is the fitting designed for, and can it be used for drinking water?
It is rated for PN 10 and temperatures from +3 to +95 °C. It holds a hygiene approval for drinking water, so it can be used in drinking water lines too.
Additional parameters
| Category: | caps press, push - PPSU |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.034 kg |
| Code: | 82832820 |
| Manufacturer: | IVAR |
| Type: | IVAR.Z PPSU |
| Size: | 32 mm |
| Max. working pressure: | PN 10 |
| Temperature range: | +3 … +95 °C |
| Body material: | PPSU |
| Weight: | 34 g |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
