End cap PRESS-PPSU IVAR.Z PPSU 16 for ALPEX, TURATEC and PEX pipes 16x2
Code: 82816820Product detailed description
The IVAR.Z PPSU 16 end cap (code 82816820) closes the end of a 16x2 pipe in the IVAR.PRESS press system – on ALPEX and TURATEC multilayer pipes as well as on PEX pipes.
- polyphenylsulfone (PPSU) body, AISI 304 stainless steel press sleeve, EPDM O-ring, polycarbonate positioning ring
- max. operating pressure PN 10, temperature range +3 to +95 °C
- hygiene certificate for drinking water
- overall length 31 mm, weight 12 g
- radial pressing with jaws of profile B or F (according to the manual also TH)
Before inserting, cut the pipe square, calibrate and deburr it, then check its position in the windows of the positioning ring. A forgotten pressing shows up as a leak during the pressure test between 1 and 6.5 bar. An end cap that has already been pressed must not be reused.
Technical data
| Code | 82816820 |
| Manufacturer | IVAR |
| Type | IVAR.Z PPSU |
| Product type | press end cap |
| Size | 16 |
| Suitable pipes | ALPEX, TURATEC, PEX 16x2 |
| Overall length L1 | 31 mm |
| Weight | 12 g |
| Max. operating pressure | PN 10 |
| Temperature range | +3 to +95 °C |
| Press jaws | B, F (also TH) |
| Material | PPSU, AISI 304 sleeve, EPDM O-ring, PC ring |
Frequently asked questions
What is the PRESS-PPSU 16 end cap used for?
It closes off the end of an ALPEX, TURATEC or PEX pipe with a 16 mm diameter (16x2). An end cap that has already been pressed must not be reused.
Which jaw is used to press the end cap?
Radially, with a B or F profile jaw for 16 mm; the manual also allows the TH profile. Before inserting, cut the pipe square, calibrate and deburr it.
Will a forgotten pressing be noticed?
Yes, an unpressed end cap leaks during the pressure test between 1 and 6.5 bar, so the mistake is found before the installation is covered.
Additional parameters
| Category: | caps press, push - PPSU |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.012 kg |
| Availability: | In stock or at supplier |
| Code: | 82816820 |
| Manufacturer: | IVAR |
| Type: | IVAR.Z PPSU |
| Product type: | press end cap |
| Size: | 16 |
| Suitable pipes: | ALPEX, TURATEC, PEX 16x2 |
| Overall length L1: | 31 mm |
| Weight: | 12 g |
| Max. operating pressure: | PN 10 |
| Temperature range: | +3 to +95 °C |
| Press jaws: | B, F (also TH) |
| Material: | PPSU, AISI 304 sleeve, EPDM O-ring, PC ring |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.