Wafer butterfly valve J9 IVAR BRA.J9.121 DN 65 (J9.121.065)

Code: J9.121.065
Not rated Rating details
141,45 € –20 %
Medziprírubová uzatváracia klapka WAFER J9 - disk nerez; NBR - DN 65; L=46mm
141,45 € –20 % 113,16 € / pcs 92 € excl. VAT Measure price:
International delivery
In stock at supplier

Detailed information

Product detailed description

Valve J9.121.065 belongs to the BRA.J9.121 series from IVAR. The ductile iron body is protected by an RAL 5002 epoxy coating and the stainless steel disc works with an NBR sealing liner. The manufacturer recommends it for heating, air conditioning and district heating, water distribution and treatment, industrial and agricultural plants, compressed-air lines and fire-fighting systems.

Technical data

  • Nominal size DN: 65
  • Face-to-face length: 46 mm
  • Pressure between flanges: PN 16
  • Pressure at pipe end: PN 10
  • Medium temperature: −10 °C … +80 °C
  • Body material: ductile iron EN GJS 400-15
  • Disc: stainless steel AISI 316
  • Seal: NBR
  • O-ring: FKM (Viton®)
  • Surface finish: epoxy coating RAL 5002
  • Actuator flange: ISO 5211 (optional)
  • Drinking water: yes, approved for drinking water

The valve can be installed in line or at the end of a pipe; at the pipe end the lower pressure PN 10 applies. The optional ISO 5211 flange allows a manual, electric or pneumatic actuator to be added. A silicone-free version is available on request. Installation and commissioning should be left to a qualified company.

Technical data

CodeJ9.121.065
ManufacturerIVAR
TypeBRA.J9.121
Nominal size DN65
Face-to-face length46 mm
Pressure between flangesPN 16
Pressure at pipe endPN 10
Medium temperature−10 °C … +80 °C
Body materialductile iron EN GJS 400-15
Discstainless steel AISI 316
SealNBR
O-ringFKM (Viton®)
Surface finishepoxy coating RAL 5002
Actuator flangeISO 5211 (optional)
Drinking wateryes, approved for drinking water

Frequently asked questions

Is valve J9.121.065 suitable for steam?
No, the manufacturer does not intend it for steam. It is meant mainly for water and other media from −10 to +80 °C and up to PN 16 between flanges.

Can an actuator be added to the valve?
Yes. The manufacturer lists an optional ISO 5211 flange to which manual, electric or pneumatic actuators can be fitted.

Can valve J9.121.065 be installed at the end of a pipe?
Yes, but at a lower pressure: PN 10 applies at the pipe end and PN 16 between flanges.

Additional parameters

Category: BRA.J9.120 - WAFER J9 butterfly valves - stainless steel disc
Warranty: 24
Code: J9.121.065
Manufacturer: IVAR
Type: BRA.J9.121
Nominal size DN: 65
Face-to-face length: 46 mm
Pressure between flanges: PN 16
Pressure at pipe end: PN 10
Medium temperature: −10 °C … +80 °C
Body material: ductile iron EN GJS 400-15
Disc: stainless steel AISI 316
Seal: NBR
O-ring: FKM (Viton®)
Surface finish: epoxy coating RAL 5002
Actuator flange: ISO 5211 (optional)
Drinking water: yes, approved for drinking water

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.