Wall-mounted fan coil SILENCE IVAR.EGWW 13 – two-pipe version, 3.5 kW heating / 3.1 kW cooling – SPECIAL OFFER
Code: I07009580Product detailed description
Compact wall-mounted unit for heating and cooling
Fancoil SILENCE IVAR.EGWW 13 is connected to a two-pipe system and, depending on the water supplied to it, heats or cools the room. At medium fan speed, it delivers 3.50 kW of heat (range 3.20–4.10 kW) and 3.10 kW of cooling (2.80–3.70 kW), of which 2.40 kW is sensible cooling and 0.70 kW is dehumidification. The fan moves 600 m³ of air per hour, and the sound pressure at a distance of 2.5 m is 40 dB(A) at medium speed.
Construction
- Heat exchanger made of copper tubes with aluminum fins, standard left-side connection
- Fan with DC motor, three speeds and automatic operation
- Microprocessor control board, status display on the unit and filters with activated carbon
- Enclosure made of self-extinguishing plastic, dimensions 940 × 298 × 200 mm, weight 12 kg
- Infrared remote control with cooling, dehumidification, ventilation and heating modes, timer, night mode and louver setting
Installation
The unit is mounted on the wall so that air circulates well in the room and the device is accessible for service. Water is connected via a 1/2" thread, condensate drain 5/8"; maximum operating pressure is 16 bar and the water in the heat exchanger must not exceed 60 °C. The fancoil comes electrically connected with a 1.6 m supply cable and terminals for a 230 V motor valve; however, the connection must be carried out by a qualified professional. It can be supplemented with a wall controller IVAR.OPTIONAL and an installation box IVAR.INST.
Technical specifications
| Code | I07009580 |
| Manufacturer | IVAR |
| Type | IVAR.EGWW 13 |
| Finishing | Wall-mounted, two-pipe |
| Heating capacity (medium speed) | 3.50 kW (3.20–4.10 kW) |
| Cooling capacity total (medium speed) | 3.10 kW, of which sensible 2.40 kW |
| Water flow for cooling / heating | 533 / 602 l/h |
| Air flow (medium speed) | 600 m³/h (550–700 m³/h) |
| Sound pressure (medium speed, 2.5 m) | 40 dB(A) |
| Power supply | 230 V / 1 f / 50 Hz |
| Max. power consumption | 60 W |
| Max. operating pressure | 16 bar |
| Water / condensate connection | 1/2" / 5/8" |
| Dimensions (w × h × d) | 940 × 298 × 200 mm |
| Net weight | 12 kg |
Frequently asked questions
What capacity does the IVAR.EGWW 13 fancoil have?
At medium speed, it heats with a capacity of 3.50 kW (water 45 °C, room 20 °C) and cools with a capacity of 3.10 kW (water 7 °C, room 27 °C), always with a water temperature difference of 5 K.
Is it necessary to drain condensate from the fancoil?
Yes, during cooling the air is dehumidified and the condensate is collected in a container with a volume of 0.39 l. The drain is connected to a 5/8" outlet.
How is the fancoil controlled?
By an infrared remote control with mode selection, fan speed, temperature and timer. As an accessory, a cable wall controller IVAR.OPTIONAL (I07917620) is available.
What must be observed when connecting electrically?
The unit is powered by 230 V via a switch that disconnects both live conductors with a contact separation of at least 3 mm, and it must have a protective conductor. Connection must be carried out only by a qualified professional.
Additional parameters
| Category: | IVAR.EGWW - Fan Coil Silence |
|---|---|
| Warranty: | 2 years |
| Weight: | 12 kg |
| Availability: | In stock or at supplier |
| Code: | I07009580 |
| Manufacturer: | IVAR |
| Type: | IVAR.EGWW 13 |
| Version: | wall-mounted, two-pipe |
| Heating capacity (medium speed): | 3.50 kW (3.20–4.10 kW) |
| Total cooling capacity (medium speed): | 3.10 kW, of which sensible 2.40 kW |
| Water flow cooling / heating: | 533 / 602 l/h |
| Airflow (medium speed): | 600 m³/h (550–700 m³/h) |
| Sound pressure (medium speed, 2.5 m): | 40 dB(A) |
| Power supply: | 230 V / 1 ph / 50 Hz |
| Max. power input: | 60 W |
| Max. operating pressure: | 16 bar |
| Water / condensate connection: | 1/2" / 5/8" |
| Dimensions (W × H × D): | 940 × 298 × 200 mm |
| Net weight: | 12 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.