Wall-mounted power supply box 230 V for IVAR.C900 thermostats – IVAC800AL – SPECIAL OFFER
Code: IVAC800ALProduct detailed description
IVAC800AL is an optional accessory for IVAR.C900 thermostats. It is a power supply that is installed flush into the wall and provides the thermostat with 230 V / 50 Hz voltage. This way, the thermostat is not dependent on batteries – no batteries are inserted into the device when using this power supply. According to the manufacturer, the power supply is suitable for thermostats of the C900 and C800 series.
- power supply 230 V AC, 50 Hz
- flush (built-in) installation
- dimensions 75 x 75 x 60 mm
- detailed wiring instructions are part of the packaging
Connection to the 230 V network must be performed only by a qualified electrician with the power supply turned off, in accordance with current regulations.
Technical specifications
| Code | IVAC800AL |
| Manufacturer | IVAR |
| Type | IVAR.C900 – accessory |
| Compatibility | IVAR.C900 thermostats, C800 series |
| Power supply | 230 V AC, 50 Hz |
| Mounting | flush (built-in) |
| Dimensions | 75 x 75 x 60 mm |
Frequently asked questions
What is the IVAC800AL box used for?
It is a 230 V power supply for flush mounting, which allows the IVAR.C900 thermostat to operate without batteries.
Do I need to insert batteries into the thermostat when using mains power?
No, when powered via IVAC800AL, batteries are not inserted into the thermostat.
With which thermostats is the power supply compatible?
The manufacturer lists it for IVAR.C900 thermostats in all three colours (IVAC900Q, IVAC900QN, IVAC900QS) and also for the C800 series.
Additional parameters
| Category: | room thermostats |
|---|---|
| Warranty: | 2 years |
| Availability: | In stock or at supplier |
| Code: | IVAC800AL |
| Manufacturer: | IVAR |
| Type: | IVAR.C900 – accessory |
| Compatibility: | IVAR.C900 thermostats, C800 series |
| Power supply: | 230 V AC, 50 Hz |
| Mounting: | flush-mounted (built-in) |
| Dimensions: | 75 x 75 x 60 mm |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.