Wall mounting set for horizontal distribution divider and hydraulic separator DN 20 – PAW.DR 3121 – SPECIAL OFFER

Product detailed description

The set PAW.DR 3121 (code 3121) is mounting accessory of the PAW system in the dimension DN 20. It attaches the horizontal distribution manifold PAW.MV20 together with the hydraulic separator PAW.HD to the wall, to which the boiler modules HEAT BLOC DN 20 are then connected.

• adjustable distance from the wall from 70 to 100 mm in 15 mm increments
• material: galvanized steel
• for manifolds PAW.MV5 and larger, two sets are recommended

Technical parameters

Frequently asked questions

How many sets of brackets do I need for the manifold PAW.MV20?
One set is sufficient for smaller manifolds. For the manifold PAW.MV5 and larger, the manufacturer recommends using two sets of PAW.DR 3121.

What distance from the wall should I choose?
The axis of the manifold can be placed 70 to 100 mm from the wall in 15 mm increments. The manufacturer recommends the maximum distance possible, as this makes it easier to install the manifold's thermal insulation.

Is the set suitable for the hydraulic separator as well?
Yes, the set is intended for mounting the horizontal manifold PAW.MV20 and the hydraulic separator PAW.HD in the dimension DN 20.