Twin-head dry-rotor pump DAB DCP2 32-750 T, DN 32 flanges

Code: 60209881
Not rated Rating details
1 287,34 € –20 %
Zdvojené suchobežné čerpadlo DAB DCP2 32-750 T, príruby DN 32
1 287,34 € –20 % 1 029,87 € / pcs 837,29 € excl. VAT Measure price:
International delivery
To order (1-2 weeks)

Detailed information

Product detailed description

DAB DCP2 32-750 T (code 60209881) is a twin-head dry-rotor pump from DAB in a flanged in-line design with DN 32 flanges. It is fitted straight into the pipe run and circulates water in the heating, air-conditioning and solar circuits of commercial buildings.

Hydraulics

  • DN 32 flanges on suction and discharge side, PN 10 or PN 16, with threaded ports for check gauges
  • the number 750 in the type code is the maximum head in centimetres, i.e. about 7.5 m
  • for the whole series the manufacturer states a flow of up to 105 m³/h and a head of up to 110 m

Motor

Air-cooled two-pole three-phase asynchronous motor, supply 3 × 230/400 V, 50 Hz, protection rating IP 55, insulation class F. Overload protection for the motor has to be provided by the user.

Materials

Pump casing and lantern are cast iron, the impeller is cast iron or technopolymer depending on the type. The shaft is stainless steel and the mechanical seal is silicon carbide (SiC/SiC) with EPDM seals to DIN 24960.

Operation and installation

The pumped liquid must be clean, free of solid and abrasive particles, non-viscous and non-aggressive. Permitted liquid temperature is −15 to +140 °C, glycol content up to 50 %, operating pressure up to 16 bar and ambient temperature up to +50 °C. The pump is installed in a fixed position, horizontally or vertically with the motor on top; motors of 7.5 kW and above vertically only. The electrical connection is a job for a qualified electrician.

Technical data

Code60209881
ManufacturerDAB
TypeDAB.DCP2
ModelDCP2 32-750 T
Designtwin-head, flanged, in-line
Flange nominal sizeDN 32 (PN 10 / PN 16)
Max. head (per designation)≈ 7.5 m
Motor poles2
Power supply3 × 230/400 V, 50 Hz
Liquid temperature−15 … +140 °C
Max. glycol content50 %
Max. operating pressure16 bar
Protection rating / insulation classIP 55 / F

Frequently asked questions

What does the number 750 in the designation DCP2 32-750 T mean?
It is the maximum head in centimetres, so according to the designation the pump reaches about 7.5 m. The actual duty point depends on the flow in the system.

Which liquids may the pump handle?
Clean water free of solid and abrasive particles, non-viscous and non-aggressive, at −15 to +140 °C and with up to 50 % glycol.

How is the pump installed?
Fixed in the pipe run, horizontally or vertically with the motor above the pump; motors of 7.5 kW and above vertically only. Electrical connection and motor protection are a job for a specialist.

Additional parameters

Category: DAB.CP,CP-G,DCP,DCP-G - Dry-Rotor Pumps, 2-Pole
Warranty: 2 years
Code: 60209881
Manufacturer: DAB
Type: DAB.DCP2
Model: DCP2 32-750 T
Design: twin-head, flanged, in-line
Flange nominal size: DN 32 (PN 10 / PN 16)
Max. head (per designation): ≈ 7.5 m
Motor poles: 2
Power supply: 3 × 230/400 V, 50 Hz
Liquid temperature: −15 … +140 °C
Max. glycol content: 50 %
Max. operating pressure: 16 bar
Protection rating / insulation class: IP 55 / F

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field
Vytvořil Shoptet | Design Shoptak.cz.