Twin-head dry-rotor pump DAB DKLM 50-300 M, DN 50 flanges
Code: 105210444Product detailed description
DAB DKLM 50-300 M (code 105210444) is a twin-head dry-rotor pump from DAB, DKLM series, in a flanged design with DN 50 flanges. It belongs to the pumps for heating, air-conditioning, solar and hot-water systems.
Designation and hydraulics
- DN 50 – nominal size of the flanges, PN 6 / PN 10 flanges with measuring ports
- 300 – maximum head in centimetres, i.e. about 3 m
- M – single-phase motor 1 × 220–240 V, 50 Hz
For the whole KL/DKL series the manufacturer states a flow of 2 to 67 m³/h and a head of up to 13.7 m.
Motor
Enclosed four-pole asynchronous motor cooled by external ventilation, protection rating IP 55, insulation class F, built to CEI 2-3. The single-phase version has built-in thermal protection and a capacitor.
Materials and operation
Pump casing and lantern are cast iron, the impeller is technopolymer. The motor shaft is AISI 316 and the mechanical seal is silicon carbide (SiC/SiC). The pumped liquid should be clean, free of solid and abrasive matter, non-aggressive, non-viscous, non-crystallising and chemically neutral; its temperature may be −15 to +120 °C and the operating pressure up to 10 bar. The connection is a job for a qualified electrician.
Technical data
| Code | 105210444 |
| Manufacturer | DAB |
| Type | DAB.DKLM |
| Model | DKLM 50-300 M |
| Design | twin-head, flanged |
| Flange nominal size | DN 50 (PN 6 / PN 10) |
| Max. head (per designation) | ≈ 3 m |
| Motor poles | 4 |
| Power supply | 1 × 220–240 V, 50 Hz |
| Liquid temperature | −15 … +120 °C |
| Max. operating pressure | 10 bar |
| Protection rating / insulation class | IP 55 / F |
| Impeller material | technopolymer |
Frequently asked questions
What does the number 300 in the designation DKLM 50-300 M mean?
It is the maximum head in centimetres, so according to the designation the pump reaches about 3 m. The actual duty point depends on the flow in the system.
What supply does the pump DKLM 50-300 M require?
The designation M means a single-phase motor supplied with 1 × 220–240 V, 50 Hz; a four-pole motor turns more slowly than a two-pole one.
Which liquid is suitable for this pump?
Clean water free of solid and abrasive matter, non-aggressive, non-viscous and non-crystallising, at −15 to +120 °C and an operating pressure of up to 10 bar.
Does the pump motor need external overload protection?
The single-phase version M has built-in thermal protection and a capacitor. For the three-phase versions T the manufacturer requires external overload protection.
Additional parameters
| Category: | DAB.DKLM,DKLP,KLM,KLP - Dry-Rotor Pumps - Various Systems |
|---|---|
| Warranty: | 2 years |
| Code: | 105210444 |
| Manufacturer: | DAB |
| Type: | DAB.DKLM |
| Model: | DKLM 50-300 M |
| Design: | twin-head, flanged |
| Flange nominal size: | DN 50 (PN 6 / PN 10) |
| Max. head (per designation): | ≈ 3 m |
| Motor poles: | 4 |
| Power supply: | 1 × 220–240 V, 50 Hz |
| Liquid temperature: | −15 … +120 °C |
| Max. operating pressure: | 10 bar |
| Protection rating / insulation class: | IP 55 / F |
| Impeller material: | technopolymer |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
