Mixed boiler module VARIMIX IVAR.VAR 20, DN 25, Kv 8, with DAB.EVOSTA2 40-70/180 pump (5506318D)
Code: 5506318DProduct detailed description
The mixed boiler module IVAR.VAR 20 (code 5506318D) sets the temperature of the water entering the heating system with a three-way mixing valve of Kv 8. The valve's secondary bypass is closed at the factory; it refines the control and raises the total Kv of the module.
- Included: flow and return pipes, three-way mixing valve, check valve, ball valves with thermometers and EPP insulation; the module is fully reversible (water supply can also come from the left)
- Data: PN 6, up to +120 °C, flow up to 3000 l/h, Kv 8
- Connection: module 1″ FF, pump 6/4″ with 130 mm centre distance; the module joins the manifold with a soft seal
- Pump: The DAB.EVOSTA2 40-70/180 circulator is included.
Any VARIMIX component can be fitted with a special contact insulation shell, which prevents condensation in cooling operation.
Technical data
| Code | 5506318D |
| Manufacturer | IVAR |
| Type | IVAR.VAR 20 |
| Product type | mixed boiler module |
| Nominal size | DN 25 |
| Max. operating pressure | PN 6 |
| Max. operating temperature | +120 °C |
| Max. flow | 3000 l/h |
| Flow coefficient Kv | 8 |
| Module connection | 1″ FF (female × female) |
| Pump connection | 6/4″ FF, centre distance 130 mm |
| Circulator | DAB.EVOSTA2 40-70/180 |
| Material | brass, steel, EPP |
Frequently asked questions
How do the individual IVAR.VAR 20 modules differ?
By the Kv value of the mixing valve (2, 4, 6 or 8) and by whether the DAB.EVOSTA2 40-70/180 pump is supplied. This code has Kv 8.
Can the module be connected with the water supply from the left?
Yes, the module is reversible. With a supply from the left, the secondary bypass must face the pump and the second bypass must be fully closed.
Is a circulation pump included?
Yes, the module is supplied with the DAB.EVOSTA2 40-70/180 pump. The version without a pump has a code without the final D.
Additional parameters
| Category: | accessories |
|---|---|
| Warranty: | 2 years |
| Code: | 5506318D |
| Manufacturer: | IVAR |
| Type: | IVAR.VAR 20 |
| Product type: | mixed boiler module |
| Nominal size: | DN 25 |
| Max. operating pressure: | PN 6 |
| Max. operating temperature: | +120 °C |
| Max. flow: | 3000 l/h |
| Flow coefficient Kv: | 8 |
| Module connection: | 1″ FF (female × female) |
| Pump connection: | 6/4″ FF, centre distance 130 mm |
| Circulator: | DAB.EVOSTA2 40-70/180 |
| Material: | brass, steel, EPP |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
