Mixed boiler module VARIMIX IVAR.VAR 21 with thermostatic insert, DN 25, with DAB.EVOSTA2 40-70/180 pump (550632D)
Code: 550632DProduct detailed description
The mixed boiler module IVAR.VAR 21 (code 550632D) controls the flow temperature with a thermostatic regulating insert of Kv 1.3. The secondary bypass on the valve body allows fine adjustment of the control and raises the flow coefficient at the same time.
- Included: flow and return pipes, thermostatic regulating insert, check valve, ball valves with thermometers and EPP insulation
- Data: PN 6, up to +120 °C, flow up to 3000 l/h, Kv 1.3
- Connection: module 1″ FF, pump 6/4″ with 130 mm centre distance; the module joins the manifold with a soft seal
- Pump: The DAB.EVOSTA2 40-70/180 circulator is included.
Any VARIMIX component can be fitted with a special contact insulation shell, which prevents condensation in cooling operation.
Technical data
| Code | 550632D |
| Manufacturer | IVAR |
| Type | IVAR.VAR 21 |
| Product type | mixed boiler module, with thermostatic insert |
| Nominal size | DN 25 |
| Max. operating pressure | PN 6 |
| Max. operating temperature | +120 °C |
| Max. flow | 3000 l/h |
| Flow coefficient Kv | 1.3 |
| Module connection | 1″ FF (female × female) |
| Pump connection | 6/4″ FF, centre distance 130 mm |
| Circulator | DAB.EVOSTA2 40-70/180 |
| Material | brass, carbon steel, EPP |
Frequently asked questions
What control accessories are available for the module?
The data sheet lists the IVAR.RV 01 axial electric actuator and the IVAR.T 5012 liquid thermostatic head with remote sensing as optional accessories.
Can the bypass be adjusted?
Yes, the secondary bypass is set by the number of turns, and the Kv value varies with the position from roughly 0.3 to 1.3.
Is a circulation pump included?
Yes, the module is supplied with the DAB.EVOSTA2 40-70/180 pump. The version without a pump has a code without the final D.
Additional parameters
| Category: | accessories |
|---|---|
| Warranty: | 2 years |
| Code: | 550632D |
| Manufacturer: | IVAR |
| Type: | IVAR.VAR 21 |
| Product type: | mixed boiler module, with thermostatic insert |
| Nominal size: | DN 25 |
| Max. operating pressure: | PN 6 |
| Max. operating temperature: | +120 °C |
| Max. flow: | 3000 l/h |
| Flow coefficient Kv: | 1.3 |
| Module connection: | 1″ FF (female × female) |
| Pump connection: | 6/4″ FF, centre distance 130 mm |
| Circulator: | DAB.EVOSTA2 40-70/180 |
| Material: | brass, carbon steel, EPP |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
