IVAR.PUFFER PS 800 heating water buffer tank – 710 l, without heat exchanger, 100 mm VLIES insulation

Code: 1V12805
Not rated Rating details
2 150,04 € –20 %
Akumulačná nádoba vykurovacej vody IVAR.PUFFER PS 800 – 710 l, bez výmenníka, izolácia VLIES 100 mm
2 150,04 € –20 % 1 720,03 € / pcs 1 398,40 € excl. VAT Measure price:
International delivery
In stock at supplier

Detailed information

Product detailed description

Heat store for closed heating systems

The IVAR.PUFFER PS 800 is a floor-standing buffer tank with a total capacity of 710 l. It stores heated heating water, whose heat is then distributed to the heating circuits. It suits boilers, heat pumps, fireplace inserts and solar systems. The tank has no internal heat exchanger and no flange – the heat source and the heating system connect directly to its sockets.

Design

  • steel without internal lining, painted on the outside
  • max. operating pressure 3 bar, max. operating temperature 95 °C
  • soft removable VLIES polyester-fibre insulation, 100 mm thick, reaction to fire class B-s2,d0, energy class C
  • 6/4" sockets at four heights: flow from the heat source, flow to the heating system, return to the heat source (approx. +50 °C) and return from the heating system (approx. +30 °C)
  • 5/4" air vent at the top, 1/2" sockets for thermometer and probe

Siting and installation

The tank belongs in a closed, ventilated room with a year-round temperature of at least +5 °C. Above 600 l, a horizontal base with sufficient load-bearing capacity and space for handling must be prepared. Empty, it weighs 148 kg; with insulation it is 1800 mm high and 990 mm in diameter, and the tilt height is 1840 mm. The insulation is fitted only at the installation site.

The system must be protected by a safety valve with an opening pressure below 3 bar and an expansion vessel – for this capacity the manufacturer specifies 50 to 80 l, for example from the IVAR.AQUAHOT range. The maximum temperature must be limited on the heat source side by controls, a safety thermostat or a bypass valve. The heating water must comply with STN 07 7401. Installation is carried out by a qualified company that completes the commissioning report; the tank is desludged once a year.

Technical data

Code1V12805
ManufacturerIVAR
TypeIVAR.PUFFER PS 800
Total capacity710 l
Heat exchangernone
Max. operating pressure3 bar
Max. operating temperature95 °C
Thermal insulationVLIES 100 mm, removable
Energy classC
Height with insulation1800 mm
Diameter with insulation990 mm
Tilt height1840 mm
Empty weight148 kg
Heating water connections6/4"
Air vent5/4"

Frequently asked questions

Can the IVAR.PUFFER PS 800 tank be used for drinking water?
No. It is a buffer tank for heating water in closed systems, and its steel has no internal lining. Domestic hot water cylinders, such as the IVAR.EUROTANK range, are intended for potable hot water.

What pressure and temperature can the tank withstand?
The maximum operating pressure is 3 bar and the maximum temperature 95 °C. The safety valve must therefore open below 3 bar, and the temperature must be limited at the heat source.

What kind of base does the tank need?
Above 600 l, the manufacturer requires a prepared, horizontal, load-bearing base with space for handling. The empty tank weighs 148 kg and the tilt height is 1840 mm.

Additional parameters

Category: for closed heating systems
Warranty: 2 years
Weight: 148 kg
Code: 1V12805
Manufacturer: IVAR
Type: IVAR.PUFFER PS 800
Total capacity: 710 l
Heat exchanger: none
Max. operating pressure: 3 bar
Max. operating temperature: 95 °C
Thermal insulation: VLIES 100 mm, removable
Energy class: C
Height with insulation: 1800 mm
Diameter with insulation: 990 mm
Tilt height: 1840 mm
Empty weight: 148 kg
Heating water connections: 6/4"
Air vent: 5/4"

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.