combination of DHW and heating

IVAR WBD combination tanks combine an indirectly heated hot water cylinder and a separate buffer tank for heating or chilled water in one body, so they replace two tanks in the plant room. The WBD 300 type has an enamelled 270 l DHW cylinder with a 3.3 m² heat exchanger, an 80 l buffer section and 70 mm PU foam insulation in class B.

Bestsellers

 (–20 %)
2 381,28 €
(1 936 € excl. VAT)

Product sorting

1 items total

List of products

Detail
–20 %
1 936 € excl. VAT
2 381,28 €

The IVAR.WBD 300 combination unit houses a 270 l domestic hot water cylinder with...

1Y9330F

Listing controls

1 items total

Combined buffer tanks with an immersed cylinder and two integrated heat exchangers allow two heat sources to be connected simultaneously, for example solar collectors and a boiler, to a single buffer tank with an immersed domestic hot water cylinder.

One heat exchanger is typically used to top up the tank's volume from the solar circuit, while the other serves as a backup or main source (boiler, heat pump). This makes it possible to efficiently combine a renewable and a conventional heat source for both DHW preparation and heating.

Frequently Asked Questions

  • Why does the tank have two heat exchangers? They allow two independent heat sources to be connected, for example solar collectors and a gas boiler, without the need for an additional tank.
  • Can the tank be used with just one source? Yes, the second heat exchanger can remain unused or serve as a reserve for future system expansion (e.g. with solar).
  • How is domestic hot water preparation handled? Through an immersed cylinder inside the tank, which is hydraulically separated from the heating circuit.
Vytvořil Shoptet | Design Shoptak.cz.