IVAR.WBD 300 combined hot water cylinder with integrated buffer tank – 270 l / 80 l
Code: 1Y9330FProduct detailed description
Two tanks in one casing
The IVAR.WBD 300 is a dual vessel for systems with a heat pump or solar heating. The upper part is an indirectly heated domestic hot water cylinder with 270 l usable capacity, heated by a permanently fitted tube coil of 3.3 m². The lower part is a separate 80 l buffer tank storing heating or chilled water for the heating circuit. One compact unit thus replaces two separate vessels.
Technical design
- DHW cylinder with internal enamelling to DIN 4753-3 and UNI 10025 and a magnesium protective anode
- buffer tank without internal coating, 1" connections
- coil: 15 kW at 60/50 °C, continuously 0.37 m³/h of hot water 10/45 °C to DIN 4708
- rigid PU foam insulation, 70 mm, energy class B
- hot and cold water 1", circulation 1/2", flange Ø 180 mm
- 6/4" sockets for electric immersion heaters in both the DHW cylinder and the buffer tank
Installation
The unit is installed upright by a qualified company in an enclosed, ventilated room above +5 °C. The DHW part is rated for 10 bar and 95 °C, the coil for 10 bar and 110 °C and the buffer tank for 6 bar and 95 °C – each circuit needs its own safety devices. A pressure reducing valve and an expansion vessel are mandatory on the cold water inlet. Once a year the unit is desludged and the anode checked.
Technical data
| Code | 1Y9330F |
| Manufacturer | IVAR |
| Type | IVAR.WBD 300 |
| DHW cylinder capacity | 270 l |
| Buffer tank capacity | 80 l |
| Coil surface | 3.3 m² |
| Coil output at 60/50 °C | 15 kW |
| Continuous DHW output 10/45 °C (DIN 4708) | 0.37 m³/h |
| Thermal insulation | rigid PU foam 70 mm, energy class B |
| Total height | 1925 mm |
| Diameter with insulation | 690 mm |
| Empty weight | 150 kg |
| Max. pressure cylinder / coil / buffer | 10 / 10 / 6 bar |
| Max. temperature cylinder / coil / buffer | 95 / 110 / 95 °C |
| Connections DHW / buffer / circulation | 1" / 1" / 1/2" |
Frequently asked questions
What is the lower 80-litre tank for?
It is a buffer tank for heating or chilled water, separate from the domestic hot water cylinder. It evens out heat pump operation in the heating circuit and is rated for max. 6 bar and 95 °C.
Which heat source is the IVAR.WBD 300 used with?
The manufacturer intends it for heat pumps and solar systems. The 3.3 m² coil transfers 15 kW with heating water at 60/50 °C.
What expansion vessel is needed on the cold water inlet?
For type 300 the manufacturer recommends an 18 to 25 l expansion vessel; the exact size is set by the system designer. Together with the pressure reducing valve, fitting it is a warranty condition.
Can I add electric heating?
Yes, both the DHW cylinder and the buffer tank have a 6/4" socket for an electric immersion heater. Electric heating of domestic hot water is, however, only an emergency solution and must not be the sole permanent heat source.
Additional parameters
| Category: | combination of DHW and heating |
|---|---|
| Warranty: | 2 years |
| Weight: | 150 kg |
| Code: | 1Y9330F |
| Manufacturer: | IVAR |
| Type: | IVAR.WBD 300 |
| DHW cylinder capacity: | 270 l |
| Buffer tank capacity: | 80 l |
| Coil surface: | 3.3 m² |
| Coil output at 60/50 °C: | 15 kW |
| Continuous DHW output 10/45 °C (DIN 4708): | 0.37 m³/h |
| Thermal insulation: | rigid PU foam 70 mm, energy class B |
| Total height: | 1925 mm |
| Diameter with insulation: | 690 mm |
| Empty weight: | 150 kg |
| Max. pressure cylinder / coil / buffer: | 10 / 10 / 6 bar |
| Max. temperature cylinder / coil / buffer: | 95 / 110 / 95 °C |
| Connections DHW / buffer / circulation: | 1" / 1" / 1/2" |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
