Cordless electro-hydraulic press tool IVAR.ACO 32 – 18 V / 5.0 Ah, 32 kN, for steel systems up to 54 mm
Code: 5196980-50Product detailed description
The IVAR.ACO 32 (code 5196980-50) is an electro-hydraulic pressing tool powered by an 18 V / 5.0 Ah battery, designed for installing carbon steel and stainless steel systems with pressing sizes up to 54 mm.
Power and supply
- pressing force 32 kN, piston stroke 40 mm, power consumption 450 W, forced cycle
- Milwaukee M18 battery 18 V / 5.0 Ah; all Milwaukee M18 battery capacities can be used
- up to 250 pressing cycles per charge depending on material and size, charging in 45 to 75 minutes
Handling and safety
- head rotating through 180° and a second trigger button for tight spaces
- LED light ring with 27 diodes lights the pressing point and its colour shows whether the correct pressing pressure was reached
- scratch-resistant display showing tool status, error messages, service indicator and battery level
- Bluetooth data transfer to the mobile app: locking, settings, site report, pressing curves
- anti-theft protection by locking with a key combination or via the app
Jaws and maintenance
The tool works with IVAR.PB2-M15 to M35 and IVAR.PB2-B16 to B32 jaws, and for sizes M42 to M54 with IVAR.PB4 jaws; the technical data sheet lists the IVAR.ZB 203-M intermediate jaw for these. The pressing pressure sensor constantly monitors the pressure and minimises wear, so routine servicing every two years is not required. Weight without battery 2.3 kg, dimensions 387 × 75 × 111 mm.
Technical data
| Code | 5196980-50 |
| Brand | IVAR |
| Type | IVAR.ACO 32 |
| Battery | Milwaukee M18, 18 V / 5.0 Ah |
| Pressing force | 32 kN |
| Piston stroke | 40 mm |
| Power consumption | 450 W |
| Pressing sizes (steel) | up to 54 mm |
| Compatible jaws | IVAR.PB2-M15–M35, IVAR.PB2-B16–B32, IVAR.PB4-M42–M54 |
| Battery capacity | up to 250 pressing cycles |
| Charging time | 45–75 min |
| Weight without battery | 2.3 kg |
| Dimensions (L × W × H) | 387 × 75 × 111 mm |
Frequently asked questions
Which press jaws does the tool use?
IVAR.PB2-M15 to M35 and IVAR.PB2-B16 to B32 jaws, and for larger sizes M42 to M54 IVAR.PB4 jaws. The choice depends on the system and size.
How many pressings does one charge give?
Up to 250 pressing cycles depending on material, size and battery capacity. Charging takes 45 to 75 minutes.
Does the tool need routine servicing?
Routine servicing every two years is not required, because the pressing pressure sensor constantly monitors the pressure and minimises wear. The display shows the tool status and the service indicator.
Additional parameters
| Category: | electro-hydraulic press tools |
|---|---|
| Warranty: | 2 years |
| Weight: | 2.3 kg |
| Availability: | In stock or at supplier |
| Code: | 5196980-50 |
| Brand: | IVAR |
| Type: | IVAR.ACO 32 |
| Battery: | Milwaukee M18, 18 V / 5.0 Ah |
| Pressing force: | 32 kN |
| Piston stroke: | 40 mm |
| Power consumption: | 450 W |
| Pressing sizes (steel): | up to 54 mm |
| Compatible jaws: | IVAR.PB2-M15–M35, IVAR.PB2-B16–B32, IVAR.PB4-M42–M54 |
| Battery capacity: | up to 250 pressing cycles |
| Charging time: | 45–75 min |
| Weight without battery: | 2.3 kg |
| Dimensions (L × W × H): | 387 × 75 × 111 mm |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.