installation aids
Product sorting
List of products
Assembly wrench - for compression fittings - 24-27
Assembly wrench - for swivel nipple - 37-48
Bending segment - 16mm; for IVAR.SWING SET/HYDRO SWING SET
Bending segment - 18 mm; for IVAR.SWING SET/HYDRO SWING SET
Bending segment - 20mm; for IVAR.SWING SET/HYDRO SWING SET
Bending segment - 26mm; for IVAR.SWING SET/HYDRO SWING SET
Bending segment - 32mm; for IVAR.SWING SET/HYDRO SWING SET
Calibrating mandrel - attachment dia. 20mm
Calibration mandrel - attachment dia. 18mm
Calibration mandrel - attachment, dia. 26 mm
Calibration mandrel - extension dia. 16mm
Deburring tool CU-INOX - 10-54mm; attachable to the REMS CENTO
Electric filling and flushing unit - 230V
Installation key - for hexagonal bolts - 27-30
Lis na ukoncenie nerezovych vlnovcovych rurok - SET
Pipe cutter for copper and stainless steel - diam. 64-120mm
Pipe straightener - for pipe ALPEX - 16-26mm
Installation aids and additional tools for working with copper, stainless steel and plastic piping systems - deburring and calibrating mandrels, pipe cutters, bending segments for hand benders (IVAR.CURVO, IVAR.PYTHON SET, IVAR.SWING SET) and sprays that make bending easier.
Bending segments are tied to a specific type of bender and pipe diameter - check compatibility with your tool before ordering.
Frequently Asked Questions
- What is a deburring mandrel used for? It removes internal and external burrs left after cutting the pipe, which would otherwise prevent a tight and reliable joint.
- How do I choose the right bending segment? According to the pipe diameter and type of bender (e.g. IVAR.PYTHON SET, IVAR.CURVO/CURVO 50, IVAR.SWING SET/HYDRO SWING SET) - the segment size must exactly match the pipe diameter.
- Why use a spray when bending? The spray reduces friction between the pipe and the bender segment, making the bend smoother and protecting the pipe surface from scratches.