Automatic home water system JSW 100 with ADARA 6, self-priming water pump for wells and irrigation

Code: PR_122192
napojeny tovar
Not rated Rating details
162,10 € / pcs 131,79 € excl. VAT Measure price:
International delivery
To order

Detailed information

Product detailed description

Automatic home water system JSW 100 with ADARA 6, which protects the pump against dry running, water backflow, water hammer, and has a built-in 0.3L pressure tank. The automatic home water system JSW 100 with ADARA 6 is used mainly seasonally, primarily for irrigation. The self-priming centrifugal horizontal pump JSW 100 features excellent efficiency. It supplies family homes with clean water from wells, where the suction depth does not exceed 8 m. A big advantage for the customer is that the self-priming JSW 100 pump with accessories can be immediately connected to a pressure tank, turning it into a functional home water system. All pumps of the JSW range are equipped with thermal protection built into the motor winding. Overall, JSW pumps are very popular, and despite their low price they are made from durable, proven materials. The pump impeller is made of noryl and brass. The mechanical seal is made of a combination of ceramics, graphite and NBR. The intermediate wall is made of stainless steel and aluminium. The pump shaft and rotor are made of AISI 304 stainless steel. Advantages of the automatic home water system pumping from wells where the suction depth does not exceed 8 metres irrigation high head corrosion resistant easy operation Digital ADARA 6 control unit with pressure sensor The ADARA 6 control unit replaces the pressure switch and has a built-in 0.3L pressure tank. The ADARA 6 unit allows setting the switch-on pressure (0.5-6bar) and switch-off pressure (0.8-9bar). It features simple and intuitive control. It guarantees simple and reliable performance The control unit's pressure sensor has a fast response time and high accuracy. A highly sensitive display shows the measured pressure in real time. It has a flow mode and a pressure mode Built-in protective functions of the ADARA 6 control unit Dry-run protection - when there is no water in the well, the ADARA 6 control unit switches off the pump. This protects the pump from damage that could occur when running without water. Overload protection Protection against frequent switching on Warning of overpressure in the pipework Warning of insufficient water Automatic restart within 24 hours The automatic home water system JSW 100 with ADARA 6 contains Self-priming pump JSW 100 ADARA 6 control unit with pressure sensor

Additional parameters

Category: Self-priming Water Pumps, Garden Pumps
Dimensions H x W x D (cm): 39x21x19
Maximum flow rate (l/min): 75
Pump design - voltage (V): 230 V
Pump head (m): 45
Supply cable length (m): 1
EAN:

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Do not fill out this field

List of discussions

M Avatar of author 23/10/2026 20:44
Je souhaite alimenter ma maison en eau propre provenant d'un puits dont la profondeur ne dépasse pas 8 mètres ; ce modèle de pompe auto-amorçante JSW 100 est-il compatible avec cette hauteur d'aspiration et dispose-t-il d'une protection contre le fonctionnement à sec ?
A Avatar of author 23/10/2026 20:44
Bonjour, oui tout à fait, ce surpresseur est conçu spécifiquement pour une hauteur d'aspiration maximale de 8 mètres. Il intègre également une protection thermique dans le moteur ainsi qu'un système ADARA 6 qui protège la pompe contre le fonctionnement à sec et le retour d'eau. Vous pouvez consulter les détails techniques directement sur la fiche produit pour confirmer toutes ces caractéristiques.
R Avatar of author 18/09/2026 16:34
Dobrý deň prajem, mám studňu s hĺbkou hladiny vody 7,5 metra od povrchu – zvládne to táto vodáreň, alebo som na hrane a riskujem, že čerpadlo nebude správne nasávať?
A Avatar of author 18/09/2026 16:34
Sacia výška JSW 100 je max. 8 metrov, takže na 7,5 m by to technicky vychádzalo, no je to naozaj na hrane. Odporúčame radšej overiť skutočnú saciu výšku aj s dĺžkou potrubia a miestnych odporov, pretože v praxi to môže byť o niečo viac ako samotná hĺbka hladiny. Ak máte pochybnosti, radi vám pomôžeme vybrať vhodnejšie riešenie.
Vytvořil Shoptet | Design Shoptak.cz.