Backup power supply GETI GEP501LF sine wave 500W wall-mounted + 100Ah battery

Product detailed description

The emergency power supply system (GETI) is a device that provides an AC power source in the event of a power outage. The emergency power supply system can be used as a backup source for various pumps, automatic boilers, power supplies, emergency lighting, camera systems and more. In normal mode, the connected devices are powered directly from the mains, and in the event of an outage, the emergency power supply system automatically switches to inverter mode. The connected device is then powered from the connected battery. If power is not restored, the emergency power supply system may shut down when the voltage of the connected battery drops to approximately 10.2 V ± 0.3 V. This protects the battery from deep discharge and subsequent damage. The EPS is equipped with a clear color display, a pure sine wave voltage inverter based on a toroidal transformer, and a fast 32-bit processor.
Warning: Installation of the assembly must always be carried out only by a person with the appropriate qualifications! The contacts of the connected battery must be suitably protected against: contact with persons, foreign objects, contact with other parts of the system, or short circuit.
Product description:
- Inverter, UPS, AVR and charger in one unit
- clear color display
- high efficiency thanks to toroidal transformer design
- high charging current
- Protection against overload, short circuit, overload and overvoltage.
Technical parameters:
- Backup battery type: LiFePO4, AGM, GEL (not included)
- backup battery voltage: 12V DC
- rated capacity: 800VA
- rated power: 500 W
- Design: wall mounting
- transformer: toroidal
- input voltage: 230 V AC - 50 Hz
- output voltage: 230 V AC ± 3% - 50Hz / pure sine wave
- charging current: 3A / 5A / 10A / 15A selectable
- Charging voltage: 13.9V-14.5V / 13.3V-13.9V (maintenance)
- Low battery voltage limit: 10.5V-11.5V (for lead-acid)/ 10.9V-11.5V (for LifePO4)
- Low battery disconnect protection: 9.8V-11V (for lead-acid)/10.6V-11V (for LifePO4)
- Response time: < 4 ms
- cooling: yes
- Operating temperature: 0 ~ 40 °C
- Relative humidity: 10 % ~ 90 %
- Storage temperature: -15°~45°C
- Battery cable length: 2 x 75 cm, M8
- Dimensions: 210x253x102 mm
The Geti gel-type lead battery is particularly suitable for solar and wind systems and caravans, but also as a replacement battery for UPS backup systems, backup power supplies, alarm systems, EPS applications, telecommunications, mobile warning and signaling devices, etc. It is a maintenance-free, sealed battery that allows any working position.
Technical parameters:
- VRLA technology (Valve Regulated Lead Acid).
- type: GEL
- voltage: 12 V
- capacity: 100 Ah
- dimensions: 328 x 172 x 217 mm
- total height (with terminals): 220 mm
- weight: approximately 29.5 kg
- internal resistance (fully charged battery): 5 mΩ
- self-discharge rate < 3 %, 25 °C
Package: 1 pc GETI GEP501LF backup power supply + 100AH lead battery
Carton weight: 35 kg