Brass ball valve, 1/2" thread, with compression nut

Product detailed description

If you need to close a branch with water or heating water, a ball valve with a compression nut and 1/2" thread will serve the purpose. The body is made of brass, the nominal pressure reaches 25 bar, and the valve is suitable for water supply systems as well as central heating in buildings. The valve includes two butterflies, blue and red.

A ball with a through-hole is housed in the valve body. By turning the handle, the opening is aligned with the direction of the pipe or across it, thus allowing or closing the flow. This makes the valve suitable for isolating individual branches during maintenance. Prefer to use control valves for intermediate positions.

Main Features

• Connection thread size: 1/2"
• Material: brass, nominal pressure: 25 bar
• Valve with compression nut
• Two butterflies in blue and red colors
• Use in buildings for water and central heating

Technical Data

Application and Installation

The valve is classified as an accessory for distributors. It is suitable for water distribution systems and central heating in buildings where individual branches need to be closed. Choose the version with a 1/2" thread according to the size of the pipe and fittings to which the valve is connected.

Before installation, release the pressure from the relevant part of the distribution system and check whether the 1/2" thread matches the pipe or fitting to which you are connecting the valve. Seal the thread with suitable sealing material and tighten the connection with appropriate force to avoid damage. After installation, perform a leak test.

Common Questions

What is the nominal pressure of this ball valve?

The nominal pressure of the valve is 25 bar.

What is included with the valve?

The valve includes two butterflies, one blue and one red.

Which systems is the valve suitable for?

It is intended for water supply systems and central heating in buildings.