Brass cap 1"
Code: 25200561Related products
Product detailed description
Brass cap 1" - for internal thread
- used for blanking off pipes or fittings with an external connecting thread in drinking water and service water pipe systems, in central heating or underfloor heating systems with a rated pressure up to 1.5 MPa and temperature up to 110°C
- can also be used for liquid substances whose properties do not damage the base material the cap is made of and do not exceed the temperature and pressure conditions specified for water
Frequently asked questions
- How do I choose the right fitting size? The thread size (e.g. 1/2", 3/4", 1") must exactly match the thread size on the pipe or fitting you are connecting to - designations such as FF (female-female), MF (male-female) and similar abbreviations in the name indicate the thread type on each side of the fitting.
- What do the abbreviations FF and MF in the name mean? F (female, internal thread) and M (male, external thread) indicate the thread type on that side of the fitting - for example "FF" means an internal thread on both sides, "MF" an external thread on one side and an internal thread on the other.
- Is sealing material needed during installation? Yes, sealing material (e.g. PTFE tape or hemp fibre with sealing paste) is normally used on threaded joints to ensure a perfectly tight connection - the thread alone without a sealant will not reliably seal.
- Does installation have to be done by a professional? A simple threaded connection can be handled by a competent DIY installer, but when working on an already functioning system (especially a gas or pressurised water/heating system) we recommend calling a plumber, who will also check the tightness of the joint after installation.
- What material and pressure class does this fitting have? The design is brass, suitable for standard water and heating pipework - exact rated pressure and temperature values (where specified for the particular product) can be found in the technical parameters above.
Additional parameters
| Category: | Caps |
|---|---|
| Warranty: | 2 years |
Product rating
Be the first who will post an article to this item!
Discussion
List of discussions
Aleš
ATRIASHOP.SI
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.