Bronze swing check valve with flap 1"

Product detailed description

The swing-check valve with a flap in size 1″ (thread G1) ensures that water in the pipe flows in only one direction. It is intended for central heating installations and for hot and cold water supply systems. The body is made of brass, the nominal pressure is 10 bar and the maximum operating temperature is 100 °C.

Main Features

• prevents backflow of water in the system
• swing flap design
• material: brass
• nominal pressure 10 bar (1.0 MPa)
• maximum operating temperature 100 °C
• for all valves of this series a declaration of conformity is issued

Technical Data

Application and Installation

The valve is installed in the pipe where it is necessary to prevent the return of water in the opposite direction, for example after the flow has stopped. When flowing in the correct direction, the flap is lifted by the water pressure and allows passage; when the flow stops or reverses, the flap returns and closes the passage. During installation, check that the G1 thread matches the connecting pipe and install the valve so that the flow direction corresponds to the flap function.

Frequently Asked Questions

What is the swing-check valve used for?

It prevents water from flowing back in the opposite direction in the system.

For which medium and parameters is the valve intended?

For hot and cold water at a nominal pressure of 10 bar and a maximum operating temperature of 100 °C.

What material is the valve made of?

Brass. A declaration of conformity is issued for all valves of this series.