BW Submersible Pump Set 4SD 3/10 + Press Basic Horizontal

Product detailed description

The complete Press Basic Horizontal submersible pump set with 4SD | 3/10 | 0.55 kW, 5/4" is the perfect choice for households, gardens and industrial purposes – a reliable submersible pump with strong discharge head and a fully equipped pressure installation set. The design is conceived for trouble-free pumping, stable pressure and the easiest possible installation.

What the set includes

• Submersible multistage pump 4SD 3/10
  • Output: 0.55 kW, 5/4″ connection, built-in 20 m cable. Stainless steel hydraulics, brass suction and discharge housings, 10 impellers made of noryl. Optimal flow rate approx. 3 m³/h at a discharge head of ~53 m, maximum discharge head up to approximately 70 m. Can be used with water temperatures up to 35 °C, with sand tolerance up to 0.25%.
• Set Press 1″ Basic Horizontal installation set
  • Vertical flow unit with a 1″ inlet, 230 V power supply, 1.1 kW output.
  • Includes:
    • 2 l pressure diaphragm tank, robust long-life diaphragm,
    • brass 1″ ball valve + fittings,
    • plastic T-piece and plastic fittings, plastic DN32 couplings, flexible hoses terminated with a plug.

Advantages of this set

• Complete solution – pump + pressure installation, all in one
• High discharge head – suitable for deep wells or large houses
• 2 l pressure tank helps maintain stable pressure and reduce pump switching frequency
• Materials: stainless steel, brass and plastic – corrosion resistance and long service life
• Horizontal and vertical installation of the set – saves space, makes installation easier
• Use: garden irrigation, household water systems, pressure boosting, water supply from wells, industrial use

When to use this set

• If you need a reliable solution for pumping water from a well, tank or reservoir where the discharge head is higher
• For houses with a more distant water source, where it is necessary to maintain system pressure
• For garden irrigation, water transfer, household water, or where stable pressure is needed with smaller to medium consumption

Installation recommendations

• Includes the necessary installation set, however during installation make sure the water is clean (use a filter if necessary)
• Install according to the installation conditions – horizontal positioning, ensure a secure suspension point for the submersible part
• Observe minimum pipe diameters for safe flow (e.g. DN32 / 1″ as included in the set)
• Check regularly, especially when pumping water containing sand: the pump may need additional protection / servicing

This complete set is an ideal choice for anyone who needs a ready-made system without having to add further components. The submersible pump combined with the Basic Horizontal pressure set guarantees reliable performance, easy installation and long service life.

PUMP TECHNICAL PARAMETERS

• Max. temperature of pumped water - 35 °C
• Max. sand content in water - 0.25%
• Min. internal borehole diameter - 100 mm
• Pump length - 801 mm
• Pump diameter - 96 mm
• Output - 0.55kW
• Voltage - 230V
• Max. flow rate - 4.8 m³/h
• Optimal flow rate - 3 m³/h | 50 l/min
• Optimal discharge head - 53 m
• Max. discharge head - 72 m
• Discharge thread diameter - 5/4"
• Cable length - 20m

Performance and efficiency curve of the 4SD 3/10 pump