Compression fitting 26 x 3 for PEX-AL-PEX pipe
Code: RCS26Product detailed description
EK compression fitting for PEX-AL-PEX and PB pipe with a diameter of 26 mm
Compression fitting for connecting multilayer PEX-AL-PEX and PB pipe to manifolds, return fittings, VK fittings, thermostatic valves and control fittings with a 1" M connection.
Can be used for radiator and underfloor heating and domestic hot water distribution. The internal ring is compressed and grips the pipe. To disassemble, simply unscrew the fitting and remove the pipe.
During installation, make sure the size of the compression fitting matches the size of the connecting pipe.
Product features:
- thread: 1"M
- tightening torque: 25 - 35 Nm
- pipe diameter: 26 mm
- for PEX-AL-PEX or polybutylene
- alt, code: 750605
Frequently Asked Questions
- What exactly is this compression fitting used for? It allows a demountable, tight connection of multilayer plastic-aluminium (PEX-AL-PEX) pipe to a metal threaded connection (e.g. on a manifold or fitting) without the need for pressing tools - just a standard wrench.
- How is the fitting installed? A union nut and a clamping ring are slid onto the end of the pipe, the pipe is then pushed fully into the fitting body, and the nut is tightened - you can find the detailed procedure in the product description.
- Can the joint be disassembled and reassembled? Yes, unlike pressed joints, a compression fitting can be repeatedly disassembled and reassembled, which is especially useful for any modifications or repairs to the piping.
- Do I need special tools? No, a standard (open-end) wrench is enough for tightening - no pressing tools are needed.
Additional parameters
| Category: | installation accessories |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.1 kg |
| Thread: | 1"M |
| Alt, kod: | 750605 |
| Pipe diameter: | 26 mm |
| Tightening Torque: | 25 - 35 Nm |
Product rating
Be the first who will post an article to this item!
Discussion
List of discussions
Jozef
Atria.sk
Push-fit Pipe fittings
Push-fit pipes and plumbing fittings are a great alternative to traditional fittings. A quick way to replace or repair plumbing installations around the home. They’re easy to install and don’t need to be soldered, making them suitable for all kinds of piping and fixtures in your home’s plumbing system.
You can create a water-tight seal on any pipes when you use push-fit waste connectors, so you’ll never need to worry about leaks again. Plastic push-fit plumbing fittings are usually demountable, whereas copper fittings are not.
Suitable for hot and cold water and central heating systems our Wavin Hep2O push-fit fittings are available in a range of sizes and come with a 50-year guarantee for extra peace of mind.
Underfloor Heating Pipe
Wavin Hep2O has a range of underfloor heating systems for new and existing floors and offers high quality, proven products that are widely available from plumbers and builders merchants nationwide. Underfloor heating systems consist of a series of pipework that is connected underneath the floor that is linked to the heating system. This allows heated water to pass underneath the floor, and the space above is more evenly heated than with other traditional forms of heating.
