Compression fitting - for copper pipe - 12x1-M24
Code: 500141Related products
Product detailed description
Compression fitting - for copper pipe, IVAR.TR 430, size: 12 x 1 - M 24, pack: 50 pcs per bag / 400 pcs per box To fit the compression fitting correctly, follow these instructions: 1. Carry out the assembly of the compression fitting in the order and direction shown in the following images. 2. Insert the pipe and the corresponding EPDM seal into the fitting and make sure everything is clean and that the sealing O-ring has not been damaged. 3. Fit the nut onto the thread and tighten it by hand; to fully tighten it, use a wrench of the appropriate size AC 670 / AC 671. Rubber parts must never be lubricated with mineral oils - for the EPDM material, use only silicone-based lubricant.
- PN 10, T = +120°C
- thread M24
- for use with Cu pipe and IVAR.C-STEEL pipe
- material: brass CW617N, O-ring - EPDM
- tightening torque 35-45 Nm for Cu piping
- tightening torque 40-50 Nm for IVAR.C-STEEL piping systems
Frequently Asked Questions
- How do I choose the right fitting size? The thread size must exactly match the thread on the pipe or fitting it connects to - the abbreviations FF (female-female thread) and MF (male-female) in the name indicate the thread type on each side.
- Is sealing material needed during installation? Yes, PTFE tape or hemp fiber with sealing paste is typically used on threaded joints to ensure a perfectly tight seal.
- Must installation be carried out by a professional? A simple threaded connection can be handled by a competent DIYer, but for work on an already functioning system (especially gas), we recommend calling in a plumber/heating technician who can also verify the joint's tightness.
Additional parameters
| Category: | Compression fitting for copper pipe |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.037 kg |
| Material type: | brass CW617N |
| Operating temperature: | +120 °C |
| Nominal pressure: | PN 10 |
| Last price update: | 13.04.2026 1:03:01 |
Product rating
Be the first who will post an article to this item!
Discussion
List of discussions
Dietmar
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.