Corner Ball Valve with Filter and Socket 1/2" × 3/8"

Product detailed description

The corner ball valve ZK.F10 with filter and socket is used for opening and closing the water flow in water supply networks. It is suitable for hot and cold water supply systems and has a size of 1/2" × 3/8", i.e., threads G1/2 and G3/8. The body is made of brass with a chromium surface finish.

Main Features

• corner design with filter and socket
• body made of brass with a chromium surface
• nominal pressure 10 bar, maximum operating temperature 100 °C
• working medium: hot and cold water in water supply systems
• an attestation of conformity is issued for all valves
• hygienic certificate issued by the National Hygiene Institute
• the range is produced with a filter, without a filter and with a ceramic head

Technical Data

Application and Size Selection

The valve is used to shut off the water supply where you need to interrupt the flow without affecting the rest of the system. The connection is based on dimensions: one end has a G1/2 thread and the other a G3/8 thread, corresponding to the designation 1/2" × 3/8". In the same range, there are also combinations of 1/2" × 1/2" and 1/2" × 3/4", so please check the threads in your installation before ordering. This version is packed in a box; the same valve in blister packaging is marked as ZK.F10B.

Frequently Asked Questions

What is a corner ball valve with a filter used for?

It opens and closes the water flow in the water supply network and, thanks to the filter, captures impurities from the flowing water.

What threads does this valve have?

G1/2 and G3/8, i.e., size 1/2" × 3/8".

For what medium and operating conditions is the valve intended?

For hot and cold water in water supply systems, at a nominal pressure of 10 bar and a maximum operating temperature of 100 °C.