DAB EVOPLUS B 120/250.40 SAN M – flanged electronic circulator for domestic hot water recirculation, bronze body, DN 40

Product detailed description

The EVOPLUS B 120/250.40 SAN M (code 60151164) is a single flanged circulator from the DAB EVOPLUS range for larger systems. The SAN version has a bronze body, which is why the manufacturer specifies it for drinking water – above all for domestic hot water recirculation in the secondary circuit. The electronic control follows the changing demand in the network and lowers the speed wherever full output is not needed.

Model specifications

• max. head 12.0 m, max. flow 23.48 m³/h
• max. power input P1 465 W, supply 1 × 220–240 V, 50/60 Hz
• DN 40 flanges, DN 40 PN 10 counterflanges available to order
• port-to-port length 250 mm, weight 16 kg
• liquid temperature −10 to +110 °C, max. pressure 16 bar
• protection rating IP44, insulation class F

Operation and communication

The control panel has an OLED display and three navigation buttons. The factory setting is proportional differential pressure (ΔP-v); constant differential pressure (ΔP-c) or a constant curve can also be selected. The electronics directly handle start/stop, economy mode, 0–10 V and 4–20 mA analogue signals, PWM, a temperature sensor signal for ΔT and ModBus communication; LonBus is available with an additional module. For the SAN version the manufacturer also lists a constant-temperature mode that keeps the water temperature in the recirculation pipe without thermostatic valves.

Design and installation

The suction and discharge flanges have threaded ports for pressure and temperature measurement. According to the data sheet, the single version is supplied with body insulation against heat loss. The circulator is installed with the motor shaft horizontal; the motor has built-in protection against overload, overheating and voltage fluctuations. Leave the mains connection to a qualified electrician.

Technical data

Frequently asked questions

What is the EVOPLUS B 120/250.40 SAN M used for?
For domestic hot water recirculation in larger networks. According to the manufacturer, the bronze body of the SAN version is suitable for drinking water, whereas cast-iron EVOPLUS models without the SAN designation are not intended for it.

Are counterflanges included?
No, according to the data sheet the DN 40 PN 10 counterflanges are ordered separately. The port-to-port length of the circulator is 250 mm.

Can the circulator be connected to a building management system?
Yes, the electronics have 0–10 V, 4–20 mA and PWM inputs, start/stop control and a ModBus interface. LonBus requires an additional module.