DAB.MICRA - submersible 3" well pumps

DAB MICRA 3" submersible pumps with a diameter of 74 mm also fit into narrow boreholes and wells where a standard 4" pump cannot be installed. The single-phase models 75 M (0.55 kW, head up to 68 m) and 100 M (0.75 kW, up to 90 m) have a G 1" discharge, IP68 protection and operate at flow rates of 0.3 to 2.7 m³/h.

Bestsellers

 (–20 %)
1 583,85 €
(1 287,68 € excl. VAT)
 (–20 %)
1 401,01 €
(1 139,03 € excl. VAT)

Product sorting

2 items total

List of products

DAB MICRA 100 M – ponorné 3" čerpadlo do úzkych vrtov a studní, 0,75 kW, 1 × 230 V
–20 %
1 287,68 € excl. VAT
1 583,85 €

DAB MICRA 100 M multistage 3" submersible pump for narrow boreholes and wells....

I0090817
DAB MICRA 75 M – ponorné 3" čerpadlo do úzkych vrtov a studní, 0,55 kW, 1 × 230 V
–20 %
1 139,03 € excl. VAT
1 401,01 €

DAB MICRA 75 M multistage 3" submersible pump for narrow boreholes and wells. With...

I0090418

Listing controls

2 items total

SUBMERSIBLE 3" WELL PUMPS

DAB.MICRA
 
  • The multistage three-inch pump for narrow boreholes and wells is permanently coupled to the motor via a standardised NEMA 3" flange connection.
  • Impellers, bearing housings and other parts are made of noryl, diffusers are made of self-lubricating polyacetal. Pump casing, shaft, suction strainer and cable guard strip are made of stainless steel. Suction and discharge bodies are made of brass, with a built-in check valve.
  • The submersible two-pole asynchronous motor with a stator encapsulated in an AISI 304 casing has a built-in resettable winding protection against overheating. The remaining mechanical parts are made of AISI 304 and brass. The sliding bearings are cooled and lubricated by a sealed water fill. Starting and overcurrent protection of single-phase motors is handled by a starting box. The starting box must be ordered separately. Protection of three-phase motors is the responsibility of the customer.
  • Pumped liquid: clean, free of solid or abrasive particles, chemically neutral, with properties close to water
  • Liquid temperature range: from 0 °C to + 35 °C
  • Max. suspended sand content: 40 g/m³
  • Protection rating: IP68
  • Insulation class: F
  • Number of starts per hour: max. 20
  • Connecting cable length:
  • MICRA 50 – 1 m
  • MICRA 75 – 1.2 m
  • MICRA 100 – 1.4 m
  • Operating range: from 0.3 to 2.7 m³/h with head up to 90 m
Vytvořil Shoptet | Design Shoptak.cz.