DAB S4 12/34 T 4GG – 4" submersible pump for wells and boreholes, 5.5 kW, 3 × 400 V
Code: 60191190Product detailed description
The S4 12/34 T 4GG (code 60191190) is a multistage submersible centrifugal pump from DAB with a 4" diameter, intended for wells and boreholes larger than 4" in diameter. It is driven by a three-phase water-filled 4GG motor rated at 5.5 kW. It suits water supply and pressure boosting in family houses and larger buildings, as well as irrigation, washing and fire-fighting systems.
Performance and dimensions
- number of stages 34, nominal flow 12 m³/h
- head up to 172 m at zero flow
- rated power P2 5.5 kW (7.5 HP), rated current 14 A, supply 3 × 400 V, 50 Hz
- discharge port 2", maximum diameter 99 mm, pump length with motor 2719 mm
- weight of pump with motor 67.9 kg
Materials and construction
The pump sleeve, shaft with coupling, suction strainer and cable guard are made of stainless steel, the suction and discharge bodies of investment-cast AISI 304 steel. The stage housings are made of AISI 304 stainless steel. Impellers and diffusers are made of technopolymer. The 4GG is a two-pole asynchronous motor filled with water: the bearings are cooled and lubricated by a water-glycol mixture, the stator is embedded in heat-insulating resin and enclosed in an AISI 304 steel casing. The hydraulics reach an efficiency index MEI ≥ 0.4.
Installation and operation
The pump is installed vertically; for horizontal installation the manufacturer recommends a cooling sleeve. The water should be clean and non-aggressive, at 0 to +40 °C with a sand content of no more than 150 g/m³; immersion is possible down to 300 m and the pump may start at most 20 times per hour. The motor withstands operation with a frequency converter in the 30–50 Hz range. Protection of the three-phase motor has to be provided by the user in the electrical installation. The electrical connection must be made by a qualified electrician.
Technical data
| Code | 60191190 |
| Brand | DAB |
| Type | DAB.S4 GG |
| Model | S4 12/34 T 4GG |
| Number of stages / nominal flow | 34 / 12 m³/h |
| Motor | 4GG, water-filled |
| Supply | 3 × 400 V, 50 Hz |
| Rated power P2 | 5.5 kW (7.5 HP) |
| Rated current | 14 A |
| Max. head | 172 m |
| Discharge port | 2" |
| Pump diameter / length | 99 mm / 2719 mm |
| Pump weight | 67.9 kg |
| Max. immersion depth | 300 m |
Frequently asked questions
Which borehole does the S4 12/34 T 4GG pump fit into?
It is intended for wells and boreholes larger than 4" in diameter. The maximum pump diameter is 99 mm and with the 4GG motor it can be immersed down to 300 m.
Does the three-phase pump need motor protection?
Yes. For the three-phase version the user has to provide the motor protection in the electrical installation, and the connection is a job for an electrician.
What water can the pump handle?
Clean, non-viscous and non-aggressive water without abrasive matter at a temperature of 0 to +40 °C. The sand content may be at most 150 g/m³.
Can the pump be installed horizontally?
It is normally installed vertically. Horizontal installation is possible, in which case the manufacturer recommends a cooling sleeve.
Additional parameters
| Category: | DAB.S4 GG - submersible 4" pumps with water-filled motor |
|---|---|
| Warranty: | 2 years |
| Weight: | 67.9 kg |
| Code: | 60191190 |
| Brand: | DAB |
| Type: | DAB.S4 GG |
| Model: | S4 12/34 T 4GG |
| Number of stages / nominal flow: | 34 / 12 m³/h |
| Motor: | 4GG, water-filled |
| Supply: | 3 × 400 V, 50 Hz |
| Rated power P2: | 5.5 kW (7.5 HP) |
| Rated current: | 14 A |
| Max. head: | 172 m |
| Discharge port: | 2" |
| Pump diameter / length: | 99 mm / 2719 mm |
| Pump weight: | 67.9 kg |
| Max. immersion depth: | 300 m |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
