Multistage submersible pumps, made entirely of stainless steel (AISI 304L or AISI 316 on request), suitable for wells with a sufficiently large diameter depending on the pump size. These pumps can be used in a wide range of applications: domestic and general water supply; sprinkler and hydrant fire-fighting systems, irrigation systems, groundwater pumping in both domestic and industrial sectors. These pumps are suitable both for pumping standard water and for aggressive water, provided the correct material (AISI 304L or AISI 316) is chosen for the hydraulic part and the pump motor. A special motor version with PE2 + PA winding can be used for a maximum liquid temperature of up to +50 °C. The pumps can be installed vertically or horizontally using a cooling jacket (it is necessary to check the suitability of the motor for horizontal installation, see the motor specification).

CONSTRUCTION: impellers, diffusers, cable guard, suction opening and discharge body made of AISI 304 stainless steel to ensure maximum pump service life.

Coupled with 4", 6" or 8" motors depending on the required hydraulic part:
4GG: 4"
4OL: 4"
6GF: 6"
TR6: 6" rewindable submersible motor
TR8: 8" rewindable submersible motor

For use with a frequency converter, see the motor specification.
• Operating range: flow up to 75 m³/h with head up to 670 m
• Max. sand/silt content: 50 g/m³
• Max. ambient temperature: +30 °C (+50 °C available on request)

ON REQUEST:

• Pump body made of AISI 316 stainless steel
• Impellers made of AISI 316 stainless steel
• Motors made of AISI 316 stainless steel for aggressive water
• Star/delta starting
• Special motor version for high temperatures
• Heavy-duty cable connector

Connection:

• SSGA/SSGB: 2 1/2"
• SSGC: 3"
• SSGD-SSGE: 4"