Decentralized ventilation unit with heat pump IVAR.ASPIRCOMFORT PRO X 460H – 460 m³/h, DN 160, horizontal
Code: IVAP20068Product detailed description
IVAR.ASPIRCOMFORT PRO X 460H (code IVAP20068) is a compact monoblock for controlled ventilation of individual rooms in residential buildings, schools, clinics or offices. It is mounted horizontally under the ceiling and connected to the exterior via an air duct DN 160 (connections 162 mm); the manufacturer recommends a duct length of at least 500 mm to limit the transfer of vibrations and noise. An outdoor unit is not required.
Thermodynamic recovery
- cooling circuit with an inverter BLDC compressor and electronic expansion valve actively recovers energy from the exhaust air
- the supplied air has a temperature close to the room temperature or even more comfortable
- heating, cooling, dehumidification only, ventilation only, night and automatic eco mode
- plate counterflow heat exchanger, refrigerant R410A
Filtration and air quality
- ePM1 filters on the supply and exhaust air, coarse pre-filter on the outside air
- air quality sensor (VOC) increases airflow when air quality deteriorates
- possibility to add UVC lamp IVAR.UVC-PRO X (code IVAP20384) for disinfection of the supplied air
Control and connection
- touch display on the unit and remote control included, 5 fan speeds including Dual Power, timer 1–24 h
- power supply 230 V / 50 Hz, max. consumption 6.1 A, power cable with plug
- CP contact for remote switching (e.g. by window contact)
- external grilles with self-closing flaps included
It is installed only inside the building at ambient temperatures of 0 to 45 °C, not in bathrooms or toilets; it must be at least 10 mm away from the ceiling. The unit requires a condensate drain with a trap. Installation and initial commissioning must be carried out by a qualified technician.
Technical parameters
| Code | IVAP20068 |
| Brand | IVAR |
| Type | IVAR.ASPIRCOMFORT PRO X 460H |
| Type | ventilation unit with heat pump and thermodynamic recovery |
| Mounting | horizontally under the ceiling |
| Airflow | up to 460 m³/h |
| Air connection | DN 160 (Ø 162 mm) |
| Functions | ventilation, heating, cooling, dehumidification |
| Refrigerant | R410A |
| Filtration | ePM1 on supply and exhaust, pre-filter |
| Control | touch display, remote control |
| Power supply | 230 V / 1 f / 50 Hz |
| Max. current draw | 6.1 A |
| Ambient temperature during installation | 0 to 45 °C |
| Accessories | UVC lamp IVAR.UVC-PRO X (IVAP20384) |
Frequently asked questions
Does the unit require an outdoor unit?
No. The entire cooling circuit with the compressor is inside the unit, and it is connected to the exterior only by an air duct DN 160.
What kind of duct is connected to the unit?
The supply and exhaust air connections have a diameter of 162 mm (DN 160). The manufacturer recommends a duct length of at least 500 mm to prevent the transfer of vibrations and noise.
Is the UVC lamp part of the delivery?
No. The UVC lamp IVAR.UVC-PRO X (code IVAP20384) is ordered as an accessory and acts on the air supplied to the room.
Additional parameters
| Category: | Decentralized ventilation units and accessories |
|---|---|
| Warranty: | 2 years |
| Availability: | In stock or at supplier |
| Code: | IVAP20068 |
| Brand: | IVAR |
| Type: | IVAR.ASPIRCOMFORT PRO X 460H |
| Version: | ventilation unit with heat pump and thermodynamic heat recovery |
| Mounting: | horizontal, below ceiling |
| Airflow: | up to 460 m³/h |
| Air connection: | DN 160 (Ø 162 mm) |
| Functions: | ventilation, heating, cooling, dehumidification |
| Refrigerant: | R410A |
| Filtration: | ePM1 on supply and extract, pre-filter |
| Control: | touch display, remote control |
| Power supply: | 230 V / 1 ph / 50 Hz |
| Max. current: | 6.1 A |
| Ambient temperature at installation: | 0 to 45 °C |
| Accessory: | UVC lamp IVAR.UVC-PRO X (IVAP20384) |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.