Decentralized ventilation unit with heat recovery IVAR.ECOCOMFORT 3 with optional remote control – SPECIAL OFFER
Code: IVAP21020Product detailed description
IVAR.ECOCOMFORT 3 (code IVAP21020) is a decentralized ventilation unit that maintains a constant air exchange in the room without opening windows and thus prevents the formation of moisture and mold. The regenerative ceramic heat exchanger accumulates heat from the exhaust air and transfers it to the supply air with an efficiency of up to 90%. The unit is suitable for rooms with an area of up to 55 m².
Technical specifications
- airflow 15 m³/h in night mode, 30 / 50 / 75 m³/h at speeds V1–V3, boost 100 m³/h
- power consumption 2.5 to 20 W
- noise level at a distance of 3 m from 15.0 dB(A) at V1 to 31.5 dB(A) at V3
- duct Ø 160 mm, power supply 110–230 V, 50/60 Hz
- protection rating IPX4, operating temperature -20 °C to +50 °C
- filter ISO Coarse according to EN ISO 16890, DC fan with brushless motor
Intelligent features
Sensors for temperature, relative humidity, air quality (eCO2), and brightness control the automatic mode, in which the unit adjusts the speed and cycle intervals on its own. Manually, you can select speeds V1–V3, night mode SLEEP, temporary supply or exhaust for 60 minutes, and alternating airflow with 45-second cycles. In summer, when it is cooler outside than inside, free cooling FREE-COOLING is automatically activated. The unit is fully controlled via the Intelliclima+ app (Wi-Fi 2.4 GHz or Bluetooth 5.0) with weekly programming. This version also works with the remote control IVAP6R6306150 (sold separately), which offers the main settings for modes, speeds, and sensors; the unit responds to commands with a colored LED indicator and an audio signal.
Installation
The unit is mounted in the perimeter wall with a telescopic PVC duct and a hinged external grille, which can be mounted from the inside or outside; it works well in ducts up to 3 m in straight length or 2.5 m with one bend. The hole is drilled at a slight outward slope to prevent condensate from flowing back. Multiple units in one or adjacent rooms can be connected in Master/Slave mode. Installation must be performed by a qualified technician with the power supply disconnected.
Technical parameters
| Code | IVAP21020 |
| Brand | IVAR |
| Type | IVAR.ECOCOMFORT 3 |
| Duct diameter | 160 mm |
| Airflow | 15–100 m³/h |
| Recovery efficiency | up to 90 % |
| Power consumption | 2.5–20 W |
| Power supply | 110–230 V, 50/60 Hz |
| Protection rating | IPX4 |
| Operating temperature | -20 °C to +50 °C |
| Filter | ISO Coarse |
| Connection | Wi-Fi 2.4 GHz, Bluetooth 5.0 |
| Control | Intelliclima+ app, optionally remote control IVAP6R6306150 |
| Room area | up to 55 m² |
Frequently asked questions
Can the unit be connected to a duct?
Yes, it works optimally in a duct with a straight length of up to 3 m or 2.5 m with one bend. The basic installation is in the perimeter wall.
Is the remote control part of the package?
No, the remote control IVAP6R6306150 is supplied as separate accessory and requires two AAA batteries. The unit is fully controlled by the Intelliclima+ app even without it.
How does it differ from the unit IVAP19996?
The technical specifications are the same, but this version allows control via the remote control IVAP6R6306150. The remote control is intended only for the unit IVAP21020.
Additional parameters
| Category: | Decentralized ventilation units and accessories |
|---|---|
| Warranty: | 2 years |
| Availability: | In stock or at supplier |
| Code: | IVAP21020 |
| Brand: | IVAR |
| Type: | IVAR.ECOCOMFORT 3 |
| Duct diameter: | 160 mm |
| Airflow: | 15–100 m³/h |
| Heat recovery efficiency: | up to 90 % |
| Power consumption: | 2.5–20 W |
| Power supply: | 110–230 V, 50/60 Hz |
| Protection rating: | IPX4 |
| Operating temperature: | -20 °C to +50 °C |
| Filter: | ISO Coarse |
| Connectivity: | Wi-Fi 2.4 GHz, Bluetooth 5.0 |
| Control: | Intelliclima+ app, optional IVAP6R6306150 remote |
| Area: | up to 55 m² |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.