Decentralized ventilation unit with heat recovery IVAR.ECOCOMFORT PLUS 160 with IR remote control – SPECIAL OFFER
Code: IVAP19993Product detailed description
IVAR.ECOCOMFORT PLUS 160 (code IVAP19993) ensures continuous air exchange in one room without opening windows and helps prevent moisture and mold. When exhausting air, it stores its heat in a ceramic regenerative heat exchanger and when supplying air, it uses it to heat the fresh air – thus recovering up to 90% of the heat. It is suitable for rooms with an area up to 36 m².
Performance and operation
- airflow 15 m³/h in night mode, 28 / 33 / 50 m³/h at speeds 1–3, boost 55 m³/h
- power consumption 1.6 to 9 W, noise level 26 to 36 dB(A) at speeds 1–3
- DC fan with brushless motor controlled by a microprocessor, filter ISO Coarse (G3)
- power supply 110–230 V, 50/60 Hz, protection class IPX4, operation at -20 °C to +50 °C
Sensors and control
Integrated sensors for temperature, air quality (VOC), humidity and brightness allow automatic operation, in which the unit selects the appropriate mode on its own. The infrared remote control with 12 buttons switches between speeds, night mode and a temporary 60-minute air supply or exhaust; one remote control can operate multiple units. The status is indicated by LEDs at the bottom of the unit. The remote control requires two AAA batteries, which are not included. The unit also has Wi-Fi 2.4 GHz and Bluetooth 5.0 with firmware updates via an app.
Installation and accessories
The unit is mounted in the perimeter wall. The telescopic PVC pipe with a minimum length of 24 cm adapts to the wall thickness and the foldable external grid can be mounted from the inside, without scaffolding. The cover is made of antistatic ABS plastic resistant to UV radiation. The electrical connection must be performed by a qualified person. Replacement filter IVAP19978, anti-smog shutter IVAP1612 and noise silencer IVAP19880 are available.
Technical specifications
| Code | IVAP19993 |
| Brand | IVAR |
| Type | IVAR.ECOCOMFORT PLUS 160 |
| Pipe diameter | 160 mm |
| Airflow | 15–55 m³/h |
| Recovery efficiency | up to 90 % |
| Heat exchanger | ceramic regenerative |
| Power consumption | 1.6–9 W |
| Noise level (speed 1–3) | 26–36 dB(A) |
| Power supply | 110–230 V, 50/60 Hz |
| Protection class | IPX4 |
| Operating temperature | -20 °C to +50 °C |
| Filter | ISO Coarse (G3) |
| Control | IR remote control |
| Room area | up to 36 m² |
Frequently asked questions
What size room can the unit ventilate?
Local ventilation is suitable for rooms with an area up to 36 m². Airflow is 15 to 55 m³/h depending on the selected speed.
How thick can the wall be?
The telescopic pipe adapts to the thickness of the perimeter wall, its minimum length is 24 cm. The external grid can also be mounted from the inside, without scaffolding.
Are batteries included with the remote control?
No, the remote control requires two AAA batteries, which are not included. Their lifespan is more than 24 months according to the manufacturer.
Additional parameters
| Category: | Decentralized ventilation units and accessories |
|---|---|
| Warranty: | 2 years |
| Availability: | In stock or at supplier |
| Code: | IVAP19993 |
| Brand: | IVAR |
| Type: | IVAR.ECOCOMFORT PLUS 160 |
| Duct diameter: | 160 mm |
| Airflow: | 15–55 m³/h |
| Heat recovery efficiency: | up to 90 % |
| Heat exchanger: | ceramic regenerative |
| Power consumption: | 1.6–9 W |
| Sound level (speed 1–3): | 26–36 dB(A) |
| Power supply: | 110–230 V, 50/60 Hz |
| Protection rating: | IPX4 |
| Operating temperature: | -20 °C to +50 °C |
| Filter: | ISO Coarse (G3) |
| Control: | IR remote control |
| Room area: | up to 36 m² |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.