IVAR.IVN21 - elbows 90° MF PRESS
The IVAR.IVN21 bend has a press socket on one side and a plain spigot end on the other that slots straight into the next fitting without a length of pipe in between. This allows a 90° change of direction even where space is tight. Made of AISI 316 stainless steel, it comes in diameters from 15 to 108 mm for heating, water or compressed air.
Product sorting
List of products
IVAR.IVN421 stainless 90° elbow for 15 mm pipe: one end is a press socket, the...
IVAR.IVN421 stainless 90° elbow for 18 mm pipe: one end is a press socket, the...
IVAR.IVN421 stainless 90° elbow for 22 mm pipe: one end is a press socket, the...
IVAR.IVN421 stainless 90° elbow for 28 mm pipe: one end is a press socket, the...
IVAR.IVN421 stainless 90° elbow for 35 mm pipe: one end is a press socket, the...
IVAR.IVN421 stainless 90° elbow for 42 mm pipe: one end is a press socket, the...
IVAR.IVN421 stainless 90° elbow for 54 mm pipe: one end is a press socket, the...
Listing controls
90° ELBOW - WITH ONE PUSH-FIT END
- PN 16, T = -20 °C to +85 °C - max. +120 °C
- 90° elbow with one push-fit end PRESS x d
- purpose of use: for sanitary technical installations, sprinkler systems,
heating systems, compressed air, solar systems, inert gases and industry - material: stainless steel grade Wst. Nr. 1.4404 (AISI 316L), EPDM O-ring
Note: Not leak-tight if not pressed, and with a press indicator up to size 54 mm.
sknavod pro instalaci a použití eurotubi 2021