electric instantaneous water heater PL 3.5 kW

Product detailed description

Electric instantaneous water heater with hydraulic switching and unpressurised (open-outlet) operation.

• installation onto unpressurised HAKL taps
• unpressurised operation at 0 bar, switching from 0.1 MPa
• hydraulic switching via microswitches
• zonnection to 230V directly into a socket.
• delivered with an electric cable and plug.
• instant and continuous water heating by up to 43 °C
• one power level of the heating spiral
• mechanical protection against overheating of the spirals.

Specification:
Unpressurised operation: the heater can only be installed with a special unpressurised tap, which prevents full water pressure from acting on the heater's structure.
Hydraulic switching: water heating is triggered mechanically by a float switch. Hydraulic switching requires higher water pressure to trigger than electronic switching.
Switching level: no option to switch the power level.
Waterproofing IP 24: the heater can be installed above or below the washbasin.
Voltage 230 V: connection to a single-phase electrical network. Water heaters up to 3.5 kW can be connected using an electric plug.
Wide choice of taps: the heater can be installed with a wide range of unpressurised HAKL taps, which are supplied together with complete accessories.
Metal flange: the solid metal flange design increases the heater's durability during installation.
Light indication: heating on/off is indicated by a red light on the front cover.
Compact dimensions: the shape and small dimensions allow installation in tight spaces.