EVOPLUS B 80/220.32 M Electronic circulation pump for small heating and air-conditioning systems - flanged
Code: 60150948Related products
Product detailed description
a synchronous permanent-magnet motor controlled by a frequency converter. Thanks to these
features the EVOPLUS electronic pump range complies with European Directive
2009/125/EC ErP (formerly EuP) and also meets the energy efficiency index (EEI ≤ 0.23).
The pump's electronic system monitors all changes in the hydraulic
parameters of the heating system and automatically adapts the
pump output to these changes so that the heating system remains fully functional with
minimum energy required to move the heating medium.
• Insulation class: F
• Voltage: 1x230 V/50/60 Hz
• Operating range: from 2 to 12 m3/h, with head up to 11 m
• Liquid temperature range: from -10°C to +110°C
• Pumped liquid: clean, free of solids and mineral oils, non-viscous, chemically
neutral with properties close to water (max. glycol content 30 %)
• Maximum working pressure: 16 bar (1600 kPa)
• Connection: individual version available with 1 1/2” and 2” thread and with flange
DN 32 and DN 40, PN 6/PN 10/PN 16
• Twin version available with flanged pump connection DN 32
and DN 40, PN 6/PN 10/PN 16
• Installation: with the motor shaft in horizontal position
Frequently asked questions
- How do I choose the right pump output/head? It must cover the pressure losses of your specific circuit (pipe length, number of fittings) - if in doubt, consult a heating specialist who will size the pump precisely for you.
- Must installation be done by a professional? A handy homeowner can fit the pump into prepared pipework, but we recommend having the electrical connection and system balancing checked by a professional.
Additional parameters
| Category: | DAB.EVOPLUS SMALL - Electronic Circulation Pumps for Small Heating/Air-Conditioning |
|---|---|
| Nominal diameter: | DN 32 |
| Nominal pressure: | PN 6/PN 10 |
| Last price update: | 09.03.2026 0:10:30 |
-
56438-file-sknavod-evoplus-small-cz-sk-verze-20-6.pdf (1.2 MB)
-
56439-file-sknavod-evoplus-small-multifunkci-modul-verze-20-czver-6.pdf (1.5 MB)
-
56440-file-sknavod-evoplus-small-zakladni-modul-verze-20-czver-6.pdf (1.1 MB)
-
56441-file-sktl-evoplus-small-czver-6.pdf (2.8 MB)
-
56442-file-skost-prohlaseni-o-shode-dab-6.pdf (567.6 kB)
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.