Fan coil unit IVAR.SL 600 DC – two-pipe version, white RAL 9003, DC Inverter motor – SALE
Code: FASL06SC1IIProduct detailed description
Warmth in winter, cooling in summer
The IVAR.SL 600 DC fan coil transfers into the room the energy of water prepared by a heat pump, a condensing boiler or a solar system – thanks to its efficient heat exchanger it also works well with low-temperature heat sources. Air is moved by a very quiet tangential fan with an economical DC Inverter motor; in cooling mode the unit also dehumidifies the air.
Model 600 data
- heating: 3.02 kW with water 45/40 °C and air 20 °C (water flow 532 l/h)
- cooling: total 2.81 kW, sensible 2.11 kW with water 7/12 °C and air 27 °C
- air flow 438 / 318 / 180 m³/h (max. / medium / min. speed)
- sound pressure 44 / 34 / 26 dB(A)
- power supply 230 V / 50 Hz, max. power input 20 W
Design and installation
The casing of galvanised, white-painted sheet steel (RAL 9003) measures 1135 × 579 × 129 mm (W × H × D, without feet). Air is drawn in from the front and from below, and the air filter is easy to remove and clean. The unit can be installed vertically – the condensate tray is included – or horizontally with the separately ordered horizontal tray IVAR.FGB. The 3/4" Euroconus water connections are on the left as seen from the front, the electrical connection on the right; a mirrored version is available on request.
Order separately
- controls – the fan coil does not work without them; choose, for example, the built-in modulating control IVAR.644 or the control board IVAR.645 with the wall control IVAR.649
- connection kit with valve 3/4" Euroconus
- horizontal condensate tray IVAR.FGB for horizontal installation
The unit has no condensate pump, and none is needed for a standard installation. Have the connection to the heating system and the 230 V electrical wiring carried out by a professional.
Technical data
| Code | FASL06SC1II |
| Brand | IVAR |
| Type | IVAR.SL DC (IVAR.SL 600 DC) |
| Version | two-pipe, white RAL 9003 |
| Heating output (45/40 °C) | 3.02 kW |
| Cooling output total / sensible (7/12 °C) | 2.81 / 2.11 kW |
| Air flow max. / med. / min. | 438 / 318 / 180 m³/h |
| Max. power input | 20 W (230 V / 1 / 50 Hz) |
| Sound pressure max. / med. / min. | 44 / 34 / 26 dB(A) |
| Connection | 3/4" Euroconus, left as standard |
| Max. operating pressure | 10 bar |
| Water content of exchanger | 1.13 l |
| Dimensions (W × H × D) | 1135 × 579 × 129 mm |
| Net weight | 23 kg |
| Installation | vertical and horizontal (with tray IVAR.FGB) |
Frequently asked questions
Can the IVAR.SL 600 DC fan coil be installed horizontally?
Yes. The condensate tray for vertical installation is included; for the horizontal position the horizontal condensate tray IVAR.FGB must be ordered additionally.
Are the controls and valve included?
No. The controls and the connection kit must be ordered separately – without controls the fan coil does not work. Suitable for the SL range are, for example, the built-in control IVAR.644 or the control board IVAR.645 with the wall control IVAR.649.
Does the fan coil need a condensate pump?
The IVAR.SL fan coil has no condensate pump and, owing to its design, does not need one for standard installations.
Additional parameters
| Category: | IVAR.SLC DC - Fan Coil Unit SL |
|---|---|
| Warranty: | 2 years |
| Weight: | 23 kg |
| Code: | FASL06SC1II |
| Brand: | IVAR |
| Type: | IVAR.SL DC (IVAR.SL 600 DC) |
| Version: | two-pipe, white RAL 9003 |
| Heating output (45/40 °C): | 3.02 kW |
| Cooling output total / sensible (7/12 °C): | 2.81 / 2.11 kW |
| Air flow max. / med. / min.: | 438 / 318 / 180 m³/h |
| Max. power input: | 20 W (230 V / 1 / 50 Hz) |
| Sound pressure max. / med. / min.: | 44 / 34 / 26 dB(A) |
| Connection: | 3/4" Euroconus, left as standard |
| Max. operating pressure: | 10 bar |
| Water content of exchanger: | 1.13 l |
| Dimensions (W × H × D): | 1135 × 579 × 129 mm |
| Net weight: | 23 kg |
| Installation: | vertical and horizontal (with tray IVAR.FGB) |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.